Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tractor Pulling Discussion Forum

roller rockers preformance gain

Welcome Guest, Log in or Register
Author 
Jerry Thomas

11-09-2006 16:58:03




Report to Moderator

attention all motor heads I am considering putting in a set of 1.9 rockers in my UB MM will this give me the same kick as a pulling cam ?? The price is a little cheaper and a whole lot easier to installthanks




[Log in to Reply]   [No Email]
docjoe

11-09-2006 17:47:20




Report to Moderator
 Re: roller rockers preformance gain in reply to Jerry Thomas , 11-09-2006 16:58:03  
Hey jerry you still trying to keep ahead of your boys and that old case? I am gathering parts for a v8 puller 400 case/chrysler hemi should be fun. later joe



[Log in to Reply]  [No Email]
B-maniac

11-09-2006 17:35:27




Report to Moderator
 Re: roller rockers preformance gain in reply to Jerry Thomas , 11-09-2006 16:58:03  
It will give you more than you have now but not as much as the cam. You need to make sure the valves are unshrouded around the tight edges to take advantage of more lift. Added compression would be the next "economy " mod. thaat will give good gains, and responsivness to the throttle.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy