Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tractor Pulling Discussion Forum

MSU AG EXPO PULL 7-19-06 10AM START

Welcome Guest, Log in or Register
Author 
Warren T.

06-19-2006 06:14:39




Report to Moderator

The Leslie Tractor club is hosting the 2nd annual pull at the MSU AG EXPO on July 19 Registration starts at 7 - 9 am The pull starts at 10am
The Garden tractors classes are all weight classes and division classes go from take the mower deck belt off to VW and Motorcycle engine powered must wear helmet
The Tractor classes are Div II top cut allowed 16.9x34 up to 6500lb 18.4x38 above6500lb,3mph,18"hitch wheelie bar recommended but not necessary if hitch point is behind the radius of rear tires.
Div III 18.4x38 full cut tires allowed,3.5 mph,20" hitch.All safety equipment needed
DIV 4 20"Hitch 18.4x38 full cut tires allowed open speed limit.all safety equipment needed rpm's for all classes 10% over
weight classes 2750,3500,4500,5500,6500,7500,8500,10000
Farm stock classes as of now are 8500,10000,12500 the day of the pull we will open that up for discussion if you and some of your friends have a farm stock class you want to run we will do our best to accommodate
Hooks are $5 limit of 3 hooks per tractor for the day
Prizes are a Ag Expo hat to all that participate and a Ag Expo hat with Class Winner embroidered on it for the respective class winner.
This is a fun pull a good time a nice facility and a great opportunity to show your equipment off .
This pull is not open to any "Whiners" of any kind so keep your complaints at home.
Yes the track is the same as last year we will do our best to keep if watered again.
Email is open for questions.
Entrance is just north of Mt Hope rd off Harrison rd east on Crescent Lane ,Parking may become a problem so if you show up late be prepared to park trucks and trailers on the east side of Farm lane after unloading and then take a wagon ride back to pull site

[Log in to Reply]   [No Email]
TeeJay

06-20-2006 17:53:43




Report to Moderator
 Re: MSU AG EXPO PULL 7-19-06 10AM START in reply to Warren T., 06-19-2006 06:14:39  
Is this a transfer sled or dead weight. What time to you have to get there to get a convenient parking space for truck and trailer?
Thanks



[Log in to Reply]  [No Email]
No. 1 Hot Rod

06-20-2006 04:50:04




Report to Moderator
 Re: MSU AG EXPO PULL 7-19-06 10AM START in reply to Warren T., 06-19-2006 06:14:39  
Warren T.
Not familiar with all your rules. DIV. II, What is the minimum distance the hook point must be from the center of the rear axle, if one has wheelie bars and a kill switch?



[Log in to Reply]  [No Email]
WarrenT.

06-20-2006 06:12:30




Report to Moderator
 Re: MSU AG EXPO PULL 7-19-06 10AM START in reply to No. 1 Hot Rod, 06-20-2006 04:50:04  
18" from center line 18"max height all the divisions will follow somewhat like NATPA divisional, rules execpt our years allow 1959 and for this pull we are allowing any year tractor. We are not going to nit pick any tractor for anything other than Safety items and 10% margin of error on RPM's.



[Log in to Reply]  [No Email]
Ken B

06-20-2006 04:19:01




Report to Moderator
 Re: MSU AG EXPO PULL 7-19-06 10AM START in reply to Warren T., 06-19-2006 06:14:39  
Darn I was loading the tractor to go to Murray State U. That sounded like a good time we will need to try it here



[Log in to Reply]  [No Email]
Ken(MI)

06-19-2006 09:22:04




Report to Moderator
 Re: MSU AG EXPO PULL 7-19-06 10AM START in reply to Warren T., 06-19-2006 06:14:39  
It"s at Michigan State University, in East Lansing Michigan



[Log in to Reply]  [No Email]
Michigan State Univ. East

06-19-2006 07:30:04




Report to Moderator
 Re: MSU AG EXPO PULL 7-19-06 10AM START in reply to Warren T., 06-19-2006 06:14:39  



[Log in to Reply]  [No Email]
Super Lurker

06-19-2006 07:26:41




Report to Moderator
 Re: MSU AG EXPO PULL 7-19-06 10AM START in reply to Warren T., 06-19-2006 06:14:39  
Warren--you posted alot of good info about what is probaly a great pull. Now we need to know what state you're in. There are 8 states that start with M and no telling how many MSU's there are with AG Expo's. I can't pull with you if I don't know where it's at. Not far from me is Murray State U.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy