Tri-County Pulls - Texas

Boerne, Tx.: April 15
Floresville,Tx.: June 3
Nordheim, Tx.: June 10
Hondo, Tx.: September 16

Other locations that still need dates:
Lytle, Tx.: TBD
Devine, Tx.: TBD

Right now the H is a division 3 tractor, lets say we made it a division 5 tractor or lets say we put a turbo on it. Or better yet built a 460 farmall with a turbo. We put on all the safety equipment, shut offs and the tractor is sound and safe, gladly let a tech committe look it over to make sure. I will even take pics to document the building of a safe tractor and upgrades and improvements to make it safer. Would we still be able to pull with you guys???? Lets say keep a tractor under 6000 pounds so the sled can handle it no problem. With as many sleds poping up over texas if one group says build one and put on a show for the spectators that would be great. But if nobody else wants you to come and pull a different sled is it worth it?

Not compete against anyone but just come to pull for the spectators, still pay the entry fees and everything. Just a question

but, there is a pull in Columbus on April 29 starting at 10 am at the Colorado County Fair Grounds if you know of a group interested in coming.

We are going to try to make the Boerne pull. Is it at the same place it was last year down next to the river/creek?
Where is Nordheim?

Nordheim is Southwest of San Antonio in the Karnes City/Yorktown area. I'll post more specific location information as we get closer.

the sled in columbus will be one built out of elcampo, TX and it is a good little sled.

There is no website. However, Tri-County pretty much follows the NATPA rules. I've attached a link to their site. Weight classes begin at 3,600 and break at 500 pound increments up to 8,600. Thereafter it's 1,000 increments up to 12,600.

• NATPA Rules.