Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tractor Pulling Discussion Forum

Wanted - Farmall M pulling Tractor

Welcome Guest, Log in or Register
Author 
Smokin Joe

02-19-2006 11:43:41




Report to Moderator

I am looking for a very competetive Farmall M pulling tractor to purchase. Must be a proven winner. Lokking for around 500 Cubic In. motor. Located in Centeral Wisconsin, will travel for pick-up. My e mail address is [email protected] Let me know if you or someone you know has one. Thanks for all the help.




[Log in to Reply]   [No Email]
superih

02-21-2006 13:16:22




Report to Moderator
 Re: Wanted - Farmall M pulling Tractor in reply to Smokin Joe, 02-19-2006 11:43:41  
If you buy a big motor BEWARE. Make sure that it was built by a reputable builder. If you are going to spend that kind of money on a used motor the seller should not have a problem tearing the motor partway down for inspection. My $0.02 says be patient and have a motor built for you. Good luck.



[Log in to Reply]  [No Email]
B BARENIE

02-20-2006 16:52:31




Report to Moderator
 Re: Wanted - Farmall M pulling Tractor in reply to Smokin Joe, 02-19-2006 11:43:41  
THEIR'S A 585 CUBE MOLINE U.B. FOR SALE IN MY NECK OF THE WOODS

PH# 219.785.9953

ASK FOR RED !

sHOULD GET THE JIB DONE FOR YOU !



[Log in to Reply]  [No Email]
AC

02-21-2006 15:09:37




Report to Moderator
 Re: Wanted - Farmall M pulling Tractor in reply to B BARENIE, 02-20-2006 16:52:31  
Is that the U that everyone complained about, and that it had an alleged $15000 motor?



[Log in to Reply]  [No Email]
b barenie

02-21-2006 15:42:17




Report to Moderator
 Re: Wanted - Farmall M pulling Tractor in reply to AC, 02-21-2006 15:09:37  
no !
and there is no such thing as an illegal motor



[Log in to Reply]  [No Email]
AC

02-22-2006 04:44:09




Report to Moderator
 Re: Wanted - Farmall M pulling Tractor in reply to b barenie, 02-21-2006 15:42:17  
Thats right...Farm stock..right down to that little piece of bailing wire wired to the governor.."Whats that for..?" "Oh...so the governor does not fall off...." ..RIGHT..... .
Doncha love it? How is the M coming? ..later, Andrew..



[Log in to Reply]  [No Email]
ChadS

02-21-2006 09:36:52




Report to Moderator
 Re: Wanted - Farmall M pulling Tractor in reply to B BARENIE, 02-20-2006 16:52:31  
WHAAAATTTT???? Sellin the big UB??? I talked to Joey the other night,, he says he is lookin at a M,,, wouldnt say who's,, LOL! I hope its Stubb's ol SM.. ChadS



[Log in to Reply]  [No Email]
ken boyes

02-20-2006 16:51:48




Report to Moderator
 Re: Wanted - Farmall M pulling Tractor in reply to Smokin Joe, 02-19-2006 11:43:41  
I HAVE AN EXCELLENT M LOOKING FOR A GREAT HOME 4.54 BORE BY 7.062 STROKE BUILT EARLY 90'S (MERFELD)
ALWAYS AN EXCELLENT PULLER 18.4 X 38 FACTORY FARMALL WIDE FRONT EVERYTHING IS TIGHT ON THIS TRACTOR OWNED BY A TOOL AND DIE MAKER WITH PROFESSIONAL PAINT MUST SEE TO APPRECIATE
CELL 563-580-0837



[Log in to Reply]  [No Email]
mpuller2

02-20-2006 15:16:37




Report to Moderator
 Re: Wanted - Farmall M pulling Tractor in reply to Smokin Joe, 02-19-2006 11:43:41  
call Ken in Dubuque, Iowa. Have a M that pulls like "Jack the Bear." His # is 563 580 0837



[Log in to Reply]  [No Email]
TONY JOHNSON

02-20-2006 05:26:39




Report to Moderator
 Re: Wanted - Farmall M pulling Tractor in reply to Smokin Joe, 02-19-2006 11:43:41  
the one in indy was 18000 last time i knew



[Log in to Reply]  [No Email]
piston

02-19-2006 13:52:58




Report to Moderator
 Re: Wanted - Farmall M pulling Tractor in reply to Smokin Joe, 02-19-2006 11:43:41  
see jeff suluvain post in lower posts he hasa good one give him a call



[Log in to Reply]  [No Email]
Good one?

02-19-2006 19:49:34




Report to Moderator
 Re: Wanted - Farmall M pulling Tractor in reply to piston, 02-19-2006 13:52:58  
The sullivan's go through more engines than NASCAR.



[Log in to Reply]  [No Email]
DSK

02-19-2006 12:39:33




Report to Moderator
 Re: Wanted - Farmall M pulling Tractor in reply to Smokin Joe, 02-19-2006 11:43:41  
There have been several 500+ cube M's listed in The Hook magazine this past year,one in Indiana for $25000, and one in Iowa for$15000. Both are very serious rides the way it looks to me. email me for phone #'s etc.



[Log in to Reply]  [No Email]
Mcred

02-19-2006 11:54:38




Report to Moderator
 Re: Wanted - Farmall M pulling Tractor in reply to Smokin Joe, 02-19-2006 11:43:41  
Build one so you know what ya got, JMHO. Justin



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy