Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum

Custom built front end

Welcome Guest, Log in or Register

02-07-2002 09:54:48

Report to Moderator

I am looking for spindles and hubs to use with my front end I am building. Any help as to where I can find them would be appreciated.

[Log in to Reply]   [No Email]
Flyin Farmall

02-07-2002 20:28:42

Report to Moderator
 Re: custom built front end in reply to casepuller, 02-07-2002 09:54:48  
a lot of guys around here use spindles and hubs from snowmobile/utility trailers

[Log in to Reply]  [No Email]

02-07-2002 14:21:04

Report to Moderator
 Re: custom built front end in reply to casepuller, 02-07-2002 09:54:48  
Northen Tool, previously Northern Hydraulics, has some 5 on 5.5 hubs with weld-on spindle stubs and bearings rated for something like 3500 lbs. for around $40-$45 each. Hope this Helps, PAT

[Log in to Reply]  [No Email]

02-07-2002 12:28:06

Report to Moderator
 Re: custom built front end in reply to casepuller, 02-07-2002 09:54:48  
Rear axle from Case 600/660 combines have light spindles & hubs.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums

Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy