Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tractor Pulling Discussion Forum

what gas oct to use

Welcome Guest, Log in or Register
Author 
horsepower

03-06-2005 09:01:07




Report to Moderator

i have a7 inch bore 9.375 stroke johndeere g with 250 comp




[Log in to Reply]   [No Email]
820puller

03-06-2005 18:06:42




Report to Moderator
 Re: what gas oct to use in reply to horsepower, 03-06-2005 09:01:07  

email me your name,phone## an location an we'll talk. later scott ([email protected])



[Log in to Reply]  [No Email]
Lynard

03-06-2005 15:37:16




Report to Moderator
 Re: what gas oct to use in reply to horsepower, 03-06-2005 09:01:07  
horsepower I would not go below 110. You may want to go 114 or 116. My friend put one together with over 300 psi and blew gasket on dyno. Seems like it was knocking on 110 before it let go. Cut pistons off and got it down to 225 psi. What are you using for head gasket? Lynn



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy