Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tractor Pulling Discussion Forum

SATPA RULES MEETING

Welcome Guest, Log in or Register
Author 
Danny Hogge Sr.

01-24-2005 15:08:18




Report to Moderator

FEB 11 6:30 PM Meeting will be held at the White Plains Baptist Church. Will be eating around 7:00 .I think spaghetti is on the menue. If you were leaving the Jefferson /Pageland track ,turn right as you leave the drive way and the church is on your left about 1/2 mile on top of the hill. I have it on good authoity that the Farmall rule regarding the cid # on the side of the block is no more .Which means a 264 in a " M " Will be legal in 2005.I hope If you have any suggestions or concerns about the rules for the coming year it will be a good time to bring it before the Rules Committe. I understand a lot of work is in progress on the sled , It will enable the lighter tractors and the Super Antique 12 mph classes to start the sled easier. Hope to see everyone there. DR SR

[Log in to Reply]   [No Email]
jd b puller

01-29-2005 18:31:55




Report to Moderator
 Re: SATPA RULES MEETING in reply to Danny Hogge Sr., 01-24-2005 15:08:18  
Where is SATPA? Website?
Thanks,



[Log in to Reply]  [No Email]
Inquisitive Minds

01-25-2005 12:28:45




Report to Moderator
 Re: SATPA RULES MEETING in reply to Danny Hogge Sr., 01-24-2005 15:08:18  
Is the rule committee still a committee of one?



[Log in to Reply]  [No Email]
DR SR

01-25-2005 20:21:29




Report to Moderator
 Re: SATPA RULES MEETING in reply to Inquisitive Minds, 01-25-2005 12:28:45  
I HAVE IT FROM A RELIABLE SOURCE THAT WE WILL HAVE A FAIR AND IMPARTCIAL COMMITTE. HEARING THE PULLERS RECOMENDATIONS AND MAKING ANY REVISIONS TO THE RULES THAT ARE FAIR AND NOT A SAFTEY HAZARD.THAT CAN BETTER THE PULLING CLUB FOR EVERYONE. DR SR



[Log in to Reply]  [No Email]
LW

01-24-2005 19:09:42




Report to Moderator
 Re: SATPA RULES MEETING in reply to Danny Hogge Sr., 01-24-2005 15:08:18  
Hey Sr.how are you? Whats that you all will have 12mph super classes next year?LW



[Log in to Reply]  [No Email]
DR SR

01-25-2005 20:29:33




Report to Moderator
 Re: SATPA RULES MEETING in reply to LW, 01-24-2005 19:09:42  
HEY LW . GOOD TO HEAR FROM YOU. AS FAR AS I KNOW IT WILL BE YHE SAME AS LAST YEAR 52 , 57, AND 6700 LBS WILL BE 12 MPH AND OF COURSE THE 7.5 MPH IN THOSE SAME WEIGHT CLASSES. I'M SURE THE RULES COMMITTE WILL BE GLAD TO CONSIDER 12 MPH IN SOME OTHER CLASSES . ESPECIAALY SINCE THE SLED IS BEING MODIFIED TO ALLOW FOR A EASIER START FOR THE LIGHTER TRACTORS. LIKE I SAID EARLIER WE ALL NEED TO ATTEND THE MEETING SO THE RULES COMMITTE CAN HEAR FROM THE PULLERS. TX DR SR

[Log in to Reply]  [No Email]
Flogger

01-25-2005 21:16:39




Report to Moderator
 Re: SATPA RULES MEETING in reply to DR SR, 01-25-2005 20:29:33  
Hey Danny,
Just my opinion but why not make all Super classes 12 mph and all stock 3.5? Sure some of the hotter tractors can pull a little faster but speed doesn't necessarily guarantee you a win. Just ask Bigdaddy or the man who used to pull the "notorious" 620 JD. Last fall at Hartsville I saw a lot of tractors pulling the 5 mph class in low gear. Seems like it would be a lot simpler to just have Stock and Super. Take care and tell Junior I'd like another crack at his Super M this year.

[Log in to Reply]  [No Email]
CASEPOWER

01-24-2005 19:24:28




Report to Moderator
 Re: SATPA RULES MEETING in reply to LW, 01-24-2005 19:09:42  
No well motors LW, I will make sure I pull down there some. Do they have a 3500 12mph??



[Log in to Reply]  [No Email]
DMW

01-25-2005 18:15:37




Report to Moderator
 Re: SATPA RULES MEETING in reply to CASEPOWER, 01-24-2005 19:24:28  
Whats a well motor?



[Log in to Reply]  [No Email]
CASEPOWER

01-25-2005 19:48:07




Report to Moderator
 Re: SATPA RULES MEETING in reply to DMW, 01-25-2005 18:15:37  
A 800 Moline power unit.



[Log in to Reply]  [No Email]
LW

01-25-2005 20:27:49




Report to Moderator
 Re: SATPA RULES MEETING in reply to CASEPOWER, 01-25-2005 19:48:07  
When you put it in a tractor its a tractor engine!



[Log in to Reply]  [No Email]
Flogger

01-25-2005 20:51:57




Report to Moderator
 Re: SATPA RULES MEETING in reply to LW, 01-25-2005 20:27:49  
Well it is a "Super" tractor isn't it LW?



[Log in to Reply]  [No Email]
LW

01-26-2005 08:27:29




Report to Moderator
 Re: SATPA RULES MEETING in reply to Flogger, 01-25-2005 20:51:57  
One thing is for sure it's not a "well motor" after I'm done with it.THe only motor I run on a tractor is the starter "motor".



[Log in to Reply]  [No Email]
Flogger

01-26-2005 08:59:58




Report to Moderator
 Re: SATPA RULES MEETING in reply to LW, 01-26-2005 08:27:29  
How many gallons per hour can you get from one of those things? LOL!



[Log in to Reply]  [No Email]
WILDMAN

01-26-2005 11:43:11




Report to Moderator
 Re: SATPA RULES MEETING in reply to Flogger, 01-26-2005 08:59:58  
KNOWINGLW AT LEAST 360 GPH.HA HA. LWWILL KEEP YOU GUESSING.



[Log in to Reply]  [No Email]
WILDMAN

01-25-2005 05:07:36




Report to Moderator
 Re: SATPA RULES MEETING in reply to CASEPOWER, 01-24-2005 19:24:28  
DR THAT SOUNDS GOOD .KEEP USINFORMED ABOUT RULES AND CLASSES. CASEPOWER THEY DID HAVE 3700 SUPER 7.5MPH. I THINK 12MPG WAS 4700-5200-5700-6700?I HOPE THEY MAKE IT 12 FOR ALL SUPER CLASSES.



[Log in to Reply]  [No Email]
DR SR

01-25-2005 20:36:45




Report to Moderator
 Re: SATPA RULES MEETING in reply to WILDMAN, 01-25-2005 05:07:36  
HEY WILDMAN YOU DO NEED TO TRY AND ATTEND . IT SURE WOULD BE GOOD TO HAVE THOSE BAD FARMALLS OF YOUR'S DOWN AND PULL WITH US . I'M SURE IF WE COULD GET 3 TRACTORS IN THE LIGHT CLASSES FOR YOUR "H" WE WILL PULL THE CLASS ON A REGULAR BASIS. WE ALREADY HAVE THEM FOR YOUR "M". ANY WAY GOOD TO HEAR FROM YOU AND COME ON DOWN IF YOU CAN. DR SR



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy