Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tractor Pulling Discussion Forum

uts pistons

Welcome Guest, Log in or Register
Author 
jerry l

12-18-2004 17:21:56




Report to Moderator

starting to tear a 283 uts engine and need some advice should i bore and go bigger pistons or stay same size and sleeve what would be the diffrence in price thanks




[Log in to Reply]   [No Email]
jerry l

12-19-2004 20:38:32




Report to Moderator
 Re: uts pistons in reply to jerry l, 12-18-2004 17:21:56  
thanks for the reply email me [email protected] about prices



[Log in to Reply]  [No Email]
minnie ub

12-19-2004 20:26:24




Report to Moderator
 Re: uts pistons in reply to jerry l, 12-18-2004 17:21:56  
you can go 4.81 without sleeving anything over and you have to sleave. i have a set of 4.81 pistons and jugs if interested.



[Log in to Reply]  [No Email]
Minnie mo va

12-20-2004 15:54:05




Report to Moderator
 Re: uts pistons in reply to minnie ub, 12-19-2004 20:26:24  
Iam really interested in the jugs and pistons you have. Would you e-mail me with some prices and your location.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy