Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tractor Pulling Discussion Forum

Minnie UB?

Welcome Guest, Log in or Register
Author 
family traditio

12-13-2004 19:08:39




Report to Moderator

Just checking to see if you had the block I am needing, you never posted back on the earlier post, the 10A2800 was off of an early G, only made them one or two years, would like to buy an exact match so I could buy just one and still match, if I have to I will but two of the later style G blocks(10A150A?)




[Log in to Reply]   [No Email]
minnie ub

12-14-2004 17:49:16




Report to Moderator
 Re: Minnie UB? in reply to family tradition, 12-13-2004 19:08:39  
sorry haven't been on lately. checked all i've got now are 10a15154



[Log in to Reply]  [No Email]
family tradition

12-14-2004 18:06:10




Report to Moderator
 Re: Minnie UB? in reply to minnie ub, 12-14-2004 17:49:16  
Is that a G jug off of a newer G? I was not sure of the part #. I did find out that my 10A2800 is a rare G jug. They are off of the early G's and were only made a few years. 4 3/4 bore is what I am looking for



[Log in to Reply]  [No Email]
Solid Junk

12-14-2004 19:10:17




Report to Moderator
 Re: Minnie UB? in reply to family tradition, 12-14-2004 18:06:10  
The 10a15154 block is for an M5 I beleive. it would be 4 5/8 bore stock, but it would also be a little over an inch shorter than the G blocks. They are the same height as the U blocks.

Joe



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy