Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tractor Pulling Discussion Forum

Chad S

Welcome Guest, Log in or Register
Author 
Earl G

09-15-2004 17:42:03




Report to Moderator

I see your pictures of a street pull, we will be pulling on asphalt this sunday the 19th, in Fowlerville, MI and the following saturday the 25th, in Webberville, MI we are east of Lansing about 20 miles, we pull on a wodden sled and don't have weight classes, we pull on a percentage basis, we have a great time, I will try to get some pictures also, we don't run duals, but alot of us do run oversize tires, I have 18.4 x 34 on a 2010 John Deere, 20.8 x 38 on a John deere 60, and 20.8 x38 on a CO-OP E3, how much weight do you usually pull?

[Log in to Reply]   [No Email]
Chad Mathison

09-15-2004 20:33:46




Report to Moderator
 Re: Chad S in reply to Earl G, 09-15-2004 17:42:03  
Earl, I would like to see the pics from the pull also, could you please send them to me @ [email protected] I pull a 30 Cockshutt and I would really love to see the E-3 with the 20.8's on it. Sounds like a blast. Good luck, Chad M



[Log in to Reply]  [No Email]
ChadS

09-15-2004 18:01:38




Report to Moderator
 Re: Chad S in reply to Earl G, 09-15-2004 17:42:03  
in the picture it is 9500 lbs. Last round with the 730, sled was at 50,000lbs. Pretty heavy. I like those duals! Tried a set of 20.8X38s few times on it, not enough for it. A lot of JD G's and Bigger Allis Chalmers, 190XT's, IH 706DT, down here, we stop at 15,000lbs in the heavyweight class. I have some more pics from Roann, will post em later on. ChadS



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy