TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tractor Pulling Discussion Forum

Hey Mopower, ChadS

Welcome Guest, Log in or Register

Author

MMark

09-06-2004 12:42:30

Report to Moderator

Went to a pull Sunday with my ZTU. Antique 39 and older 2 plow class. Got a third, got beat by a Case CC and a MH 101 SR. I missed the weight by about 50# on the back. I think the 6 ft I was behind would have been less. Not bad, I was a 50-60 ci underdog to the 2 that beat me. By the way there wasn't JD or IH within 30 ft of the top three. These little MM are just amazing.

[Log in to Reply] [No Email]

Augie

09-06-2004 19:16:47

Report to Moderator

Re: Hey Mopower, ChadS in reply to MMark, 09-06-2004 12:42:30

I pulled the junkyard R Saturday. Took 5th in the 3500 and 8th in the 4000. Didn't feel too bad about it since they didn't seperate the out-of-field tractors from the cut tire tractors.

If they'd seperated the classes the old pos would have come home with two wins.

I think it's gonna pull pretty good once I get it running right.

[Log in to Reply] [No Email]

Joe Leising

09-07-2004 16:40:00

Report to Moderator

Re: Hey Mopower, ChadS in reply to Augie, 09-06-2004 19:16:47

Hey Aug!

Good job! Took a first in the 4000 and 5th in the 4500 w/ my ZB. Stupid U died at 170 feet :(

What's wrong with Rozie? loose nut behind the wheel?

Joe

[Log in to Reply] [No Email]

Augie

09-07-2004 19:31:21

Report to Moderator

Re: Hey Mopower, ChadS in reply to Joe Leising, 09-07-2004 16:40:00

Rozie has a rusty governor. Also had about half a pound of plumber's solder in there from where some dipstick (not this dipstick) tried to solder the plunger rod to the arm on the output shaft.

I cleaned it up as best I could but it really needs a new plunger, plunger rod, and spring. If nothin else I'll get a washer installed between the spring and plunger before we pull this Saturday.

My good cylinder head is still at the machine shop and ain't gonna be done by the weekend. A buddy of mine here in town has offered to sell me one of his propane heads. I'm thinkin about it.

I think there's still hope for the tractor, not sure about the loose wheel nut though...

[Log in to Reply] [No Email]

Mopower

09-06-2004 19:07:47

Report to Moderator

Re: Hey Mopower, ChadS in reply to MMark, 09-06-2004 12:42:30

Keep the dream alive MMark!

[Log in to Reply] [No Email]

ChadS

09-07-2004 06:33:59

Report to Moderator

Re: Hey Mopower, ChadS in reply to Mopower, 09-06-2004 19:07:47

Good Job Ya All!! ChadS

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy