Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tractor Pulling Discussion Forum

Traverse City, MI pull Aug. 10

Welcome Guest, Log in or Register
Author 
wayne stine

07-28-2004 19:59:48




Report to Moderator

Farm Stock pull, 6000# and 8500#, 5 mph. Pays 10 places. 18.4 tires max size, top cuts allowed. Must have wheelie bars. Also street stock 4x4 pick-ups 6500#. Pulling on Thumb sled. Starts at 5:30 pm.




[Log in to Reply]   [No Email]
Pullin A

07-29-2004 19:20:54




Report to Moderator
 Re: Traverse City, MI pull Aug. 10 in reply to wayne stine, 07-28-2004 19:59:48  
Do you need a working pto for the dyno or run what ya brung? Where at in Traverse City?



[Log in to Reply]  [No Email]
Wayne

08-02-2004 02:50:36




Report to Moderator
 Re: Traverse City, MI pull Aug. 10 in reply to Pullin A , 07-29-2004 19:20:54  
No PTO needed. We will check RPM's at crankshaft. Allowed 20% over factory high idle. Traverse City is in nortwestern Lower Penninsula in Michigan. Would like to see everyone join us.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy