Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tractor Pulling Discussion Forum

Pa Pulls

Welcome Guest, Log in or Register
Author 
Hilltop Antique

05-12-2004 17:02:45




Report to Moderator

Looking for a fun place to pull? Try The Hilltop Antique Pulling Club located in Worthington Pa. June 12, June 26, July 17 & Aug 7 Raindates are June 13, June 27, July 18 & Aug 8. Bring a chair!!! Weighin 9 am & 10am START (Prompt)
This is an antique club: weight classes, 3500,3750,4000,4500,5000,5500,6500,7500,8500
Our 5 Classes are points pulls Antique First Gear, Antique Any Gear, Farm Class, Antique Open & Antique Double tree (non-points).
Membership required to pull $15.00 single & $25.00 family. Hook fee is $ 5.00
Spectators are free. (Transfer Sled)
Call Duane 724-297-3032 for rules & info& directions

[Log in to Reply]   [No Email]
Ohio Puller

05-12-2004 18:20:05




Report to Moderator
 Re: Pa Pulls in reply to Hilltop Antique Pulling C, 05-12-2004 17:02:45  
To the Hill toppers.

You say come and have fun. But, you failed to mention just bring your 15.5-38 tires.



[Log in to Reply]  [No Email]
Hilltop Antique Pulling C

05-13-2004 03:19:56




Report to Moderator
 Re: Re: Pa Pulls in reply to Ohio Puller , 05-12-2004 18:20:05  
ooops sorry with 5 divisions didn't feel I could fit it all in. First Gear 14.9 or 15.5x38 max. no cuts 18" drawbar 10% rpm max overstock
Any Gear 14.9 or 15.5x38 max.unless factory equipped with larger tires 18" drawbar 10% rpm max overstock no cuts
Farm Class 20" drawbar 18.4x38 max. 2500 rpm no cuts, any tire with the leading edge modified will be considered cut
Antique Open: 20" drawbar 18.4x38 max Cuts permitted, Any engine running over 2500 rpm MUST HAVE SCATTER BLANKET & SIDE SHIELDS

all classes/divisions Wheelie bars are recommended but not mandatory
Double tree all general rules apply if interested call for rules AD run in Farm & Dairy's May 6th issue page A 26

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy