Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tractor Pulling Discussion Forum

Texas pulls

Welcome Guest, Log in or Register
Author 
Russ

03-23-2004 17:58:05




Report to Moderator

Any body know of some of the dates of pulls?




[Log in to Reply]   [No Email]
colekicker

03-24-2004 07:45:06




Report to Moderator
 Re: Texas pulls in reply to Russ , 03-23-2004 17:58:05  
Also, Oct. 23 there will be another pull in Burton, Texas.



[Log in to Reply]  [No Email]
JDGunt-Texas Pull Dates

03-24-2004 07:32:26




Report to Moderator
 Re: Texas pulls in reply to Russ , 03-23-2004 17:58:05  
Our pull in Corsicana is April 2-3rd... Here are the dates of pulls that I have..
April 3 Corsicana, TX
April 17 Henderson, TX
April 24 Cisco, TX
May 8 Stith, TX (No Pull, show-plow Day)
June 26 Dublin, TX
August 28 Big Spring, TX
Sept 11 Columbus, TX
Oct 16 Valley Mills, TX

The Sandyland bunch from west TX has not finalized their schedule yet.. and I know I do not have all of the other clubs events and pulls...
JDGnut
Nov. 6 Abline

[Log in to Reply]  [No Email]
Gpower

03-24-2004 07:26:17




Report to Moderator
 Re: Texas pulls in reply to Russ , 03-23-2004 17:58:05  
We are having the pull here in Corsicana, April 2nd and 3rd. Dick Hensons Foxfire Arena, practice pull will start about 3pm on Friday, and Saturday the pull will start at 10:00am. Hope to see you there.

Gpower



[Log in to Reply]  [No Email]
colekicker

03-23-2004 19:02:50




Report to Moderator
 Re: Texas pulls in reply to Russ , 03-23-2004 17:58:05  
May 1st there's a pull in Burton, Texas at the Cotton Gin Festival. Probably will have practice Friday afternoon. Also a pull on Sunday. Weight classes. Two sleds. Email for more info.



[Log in to Reply]  [No Email]
Centerline

03-24-2004 05:24:41




Report to Moderator
 Re: Re: Texas pulls in reply to colekicker, 03-23-2004 19:02:50  
Is the Burton pull in Johnson or Washington county? I am located near Weatherford. Thanks, CL



[Log in to Reply]  [No Email]
colekicker

03-24-2004 06:30:21




Report to Moderator
 Re: Re: Re: Texas pulls in reply to Centerline, 03-24-2004 05:24:41  
The pull is located in Burton, Texas. Burton is in Washington County, "The Birthplace of Texas." Burton is about 12 mi West of Brenham, Texas, the home of Blue Bell ice cream. The entrance for exhibitors will be Spur 125 on the East side of Burton, different from last year. People with semi's have a different entrance. The pull is scheduled to start at 1 PM, directly following the parade which is at 11 AM. $15 hook fee with trophies. Basically its run what ya brung and hope you brung enough. MODIFIED tractors will be in a separate class. Suitcase weights are allowed in both classes. 20" max hitch height locked.

[Log in to Reply]  [No Email]
RED

03-24-2004 08:41:30




Report to Moderator
 Re: Re: Re: Re: Texas pulls in reply to colekicker, 03-24-2004 06:30:21  
Hey Guys, Blew the dust off The Farmall this past weekend and ran it for a while. there is going to be a pull in Taylor the same wekend of one of the antique pulls on June 25-26 it is at the new arena they built north of town. It is going to be put on by Outlaw group. They are going to have the real deal. Modified tractors, 2wd trucks, 4wd trucks, and of course the best of them all, Pro Stock and Super Stock Diesel. If you have never seen a pull like this I would check it out. I think the farmall is going to sit at home that weekedn and we are going to go watch them blow some serious black smoke. It can be found on the Outlaw Tractor pulling web site.

[Log in to Reply]  [No Email]
colekicker

03-24-2004 10:56:55




Report to Moderator
 Re: Re: Re: Re: Re: Texas pulls in reply to RED, 03-24-2004 08:41:30  
Sure hope that Red machine makes it to Burton. Royce is fixing the tranny in the sled that gave us problems last time. I am making mods to my new super m I ran in oct. Still a lot of work left, but it will run. This ones gonna be run right. Lots of fans on that hillside!!!!



[Log in to Reply]  [No Email]
JDGnut

03-24-2004 10:45:58




Report to Moderator
 Re: Re: Re: Re: Re: Texas pulls in reply to RED, 03-24-2004 08:41:30  
Then U'r ahead of me.. I started the G the other day... but didn't move it.. or knock the dust off.. I guess I'll get to it this weekend... I see that the pull in Taylor is the weekend before the big pull in WhiteRight... I guess they are hoping to get a few that will come early... It will be good to get more Outlaw pulls in this area.. (TX) When U going to get the BIG Red machine back together????? JDGnut

[Log in to Reply]  [No Email]
Red

03-24-2004 11:15:55




Report to Moderator
 Re: Re: Re: Re: Re: Re: Texas pulls in reply to JDGnut, 03-24-2004 10:45:58  
Well Lets see, about the Big Red Machine, First we need to finish putting the head back on our 5288 and get it running, then we need to finish building the allis CA for general use around the farm. Next we have to figure out the hydrolic problem on the 1066 and the 584. When that is done and they are all out of the shop and we have some more room we might bring the Big Red Machine back in. If we can move the junk far enough out of the way, oh , the lottery would be nice,do you see wher I am going with this. Hopefull seeing some real smoke at taylor can will get things going again. We bought some new parts for it while at Loiuisville. right now it is built as a 3288 and has that sheet metal, it only pulled one season like that. Probably going to go back together as the 1466 because that is how most people would remember it if they see it at a pull. the wheels are beginning to turn though, might get it running in the next year or two if we have another good pecan season this fall. Later Guys, Red

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy