Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum

NATPA Question

Welcome Guest, Log in or Register
Author 
CASEPOWER

11-13-2002 10:07:29




Report to Moderator

I was looking at the points for div. 5 and did not see Bill Bear in it anywere. I was just wondering why??




[Log in to Reply]   [No Email]
3750 and 4000

11-13-2002 10:36:51




Report to Moderator
 Re: NATPA Question in reply to CASEPOWER, 11-13-2002 10:07:29  
Look at 3750 and 4000



[Log in to Reply]  [No Email]
CASEPOWER

11-13-2002 10:43:32




Report to Moderator
 Re: Re: NATPA Question in reply to 3750 and 4000, 11-13-2002 10:36:51  
I was looking in a way higher weight class. What is he pulling??



[Log in to Reply]  [No Email]
Gunk

11-13-2002 10:50:27




Report to Moderator
 Re: Re: Re: NATPA Question in reply to CASEPOWER, 11-13-2002 10:43:32  
He did have an Oliver - super 88 motor with a 770 frame and rear end. Called it a 880.



[Log in to Reply]  [No Email]
Just another example.....

11-13-2002 11:11:32




Report to Moderator
 Re: Re: Re: Re: NATPA Question in reply to Gunk, 11-13-2002 10:50:27  
Here we go again with Bear! Had an illegal 880 (if the rearend and frame is different) than what an 880 is supposed to be, now we have an illegal 460! When will the board and rest of NATPA finally say, ENUFF IS ENUFF!!! There also is questions regarding Suzie's Ford legality! This is worse than the weak 88 from NC that runs illegal fuel! Wonder if the new owner will ever pull it at a BIG pull??

[Log in to Reply]  [No Email]
TimC

11-14-2002 06:26:43




Report to Moderator
 Re: Re: Re: Re: Re: NATPA Question in reply to Just another example....., 11-13-2002 11:11:32  
So, tell us the facts about the fuel. Specific gravity has to be 750, he was at 755. Big deal, who cares. He wasn't the only one over but he was the only one d qed.
While you are at it, call Duke and tell him he built a week 88 for Tilley. You might as well let Jack and Adrian know they have week olivers since Duke built those to.

There would be no purpose for Randy to pull. If he didn't beat everyone by 50 feet you would laugh at him. If he did he would be a cheater.

[Log in to Reply]  [No Email]
Mikey

11-14-2002 11:01:32




Report to Moderator
 Re: Re: Re: Re: Re: Re: NATPA Question in reply to TimC, 11-14-2002 06:26:43  
When you say that there is no point in him pulling, that makes no sense! If he was willing to buy a tractor that has had as much done to it as everyone says, why stay away and hide in Hoosier, TN or whatever? Personally, I would want to know if it can compete on the national level, not just beat up on div. III tractors at home.



[Log in to Reply]  [No Email]
C'Mon, Bring It Out!

11-14-2002 11:35:30




Report to Moderator
 Re: Re: Re: Re: Re: Re: Re: NATPA Question in reply to Mikey, 11-14-2002 11:01:32  
Yes, well said. Let's get our HEAD out and go to some pulls (no pun intended). You know it'll be OK, heck, it had Tilley's hands on it so could theoretically could run with Lustik/Blackbourn/and all the other alky burners!



[Log in to Reply]  [No Email]
terry

11-14-2002 07:43:41




Report to Moderator
 Re: Re: Re: Re: Re: Re: NATPA Question in reply to TimC, 11-14-2002 06:26:43  
People just want to see another good 88 run. Everyone gets beat sometime, if it is a good 88, then let's see it and quit talking about how good it is! I'm sure this Randy could do better than the time I got to see Tilley run it. Saw him drive once, and once was enough!!



[Log in to Reply]  [No Email]
LW

11-13-2002 15:17:19




Report to Moderator
 Re: Re: Re: Re: Re: NATPA Question in reply to Just another example....., 11-13-2002 11:11:32  
Hey why don't you stop being a coward and leave your name.



[Log in to Reply]  [No Email]
You First

11-13-2002 16:50:56




Report to Moderator
 Re: Re: Re: Re: Re: Re: NATPA Question in reply to LW, 11-13-2002 15:17:19  
What's your name? LW?



[Log in to Reply]  [No Email]
LW

11-13-2002 19:21:39




Report to Moderator
 Re: Re: Re: Re: Re: Re: Re: NATPA Question in reply to You First, 11-13-2002 16:50:56  
LW you moron



[Log in to Reply]  [No Email]
Eat More

11-13-2002 20:35:42




Report to Moderator
 Re: Re: Re: Re: Re: Re: Re: Re: NATPA Question in reply to LW, 11-13-2002 19:21:39  
haha



[Log in to Reply]  [No Email]
LW STANDS FOR..................................

11-13-2002 19:50:06




Report to Moderator
 Re: Re: Re: Re: Re: Re: Re: Re: NATPA Question in reply to LW, 11-13-2002 19:21:39  
Lack of witt or Looser Winer or Lost and Wacky or Less of Wewe or Little Wewe or Left to Waller or Last to Win well you get the drift,



[Log in to Reply]  [No Email]
LARGE WHIPPING

11-14-2002 03:57:36




Report to Moderator
 Re: Re: Re: Re: Re: Re: Re: Re: Re: NATPA Question in reply to LW STANDS FOR.................................., 11-13-2002 19:50:06  
that's what you'll be gettin in the end,if you can't figure out how to run with the big dogs keep your pathetic candy a## on the porch!LW



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy