TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tractor Pulling Discussion Forum

jd 60 power

Welcome Guest, Log in or Register

Author

the green man

04-24-2008 20:24:44

Report to Moderator

i have a 60 its pretty well stock and all im getting off the dyno is 33hp is this normal

[Log in to Reply] [No Email]

04-28-2008 08:35:53

Report to Moderator

Re: jd 60 power in reply to the green man, 04-24-2008 20:24:44

gas-41.6
distillate-33.3
lpg-42.2
all pt0/belt hp.

if it is a stock tractor, it could possibly be worn out and need a good rebuilding. if you want to make a real puller, make sure you have a gas 60 as the all-fuel ones were kind of rare.

[Log in to Reply] [No Email]

buickanddeere

04-26-2008 16:12:26

Report to Moderator

Re: jd 60 power in reply to the green man, 04-24-2008 20:24:44

No.
Compression, valve lash, carb setting, ignition timing, governor spring tension, bunged oilbath, exhaust heat valve turned to hot etc.

[Log in to Reply] [No Email]

Frank in WV

04-25-2008 05:31:40

Report to Moderator

Re: jd 60 power in reply to the green man, 04-24-2008 20:24:44

Bushhog Papa is right, if it is an all fuel model that is about all you will get out of a stock all fuel 60. Gasoline or LP will give you the 41 he mentions.

[Log in to Reply] [No Email]

BushogPapa

04-24-2008 20:39:30

Report to Moderator

Re: jd 60 power in reply to the green man, 04-24-2008 20:24:44

That is all you get, if it is an "All-Fuel" 60

The gasoline versions should give about 41 HP.

[Log in to Reply] [No Email]

630rich

04-24-2008 21:41:42

Report to Moderator

Re: jd 60 power in reply to BushogPapa, 04-24-2008 20:39:30

I got a j.d. B that has that, you are too low.

[Log in to Reply] [No Email]

BushogPapa

04-25-2008 15:07:01

Report to Moderator

Re: jd 60 power in reply to 630rich, 04-24-2008 21:41:42

Nope, that is right, all except the decimal point fraction...

By the way, no JD "B" was made with over roughly 27.5 PTO or 24.5 DRAWBAR hp...

Sure, plenty have 5" power blocks, etc, but not Original Horse power..

The 1st 60 I had was an "All-Fuel" and wouldn't pull any more than my +.180 "B"...it wouldn't pull a 3-14" plow except in 1st gear..! Just plain didn't have enough guts to pull it in 2nd..at ALL..!

Now, my stock 630 plowed fine in 2nd with 4-16" semi-mounted, even in alfalfa..!
Funny, it did it with only 44 HP..or..maybe that valve job I did put a little more air in there..... ..?? (Match-Ported, etc..).

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy