Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum

Howard Gem Rotavator: Parts Source?

Welcome Guest, Log in or Register
Author 
Mike

11-07-1998 09:57:02




Report to Moderator

Hello, I am trying to find a parts source for my two Howard Gems. These are very heavy duty walk behind tillers. They were made in England but not being made anymore. A source for new or used parts or information would be appreciated. Thank You, Mike




[Log in to Reply]   [No Email]
Mario Noto

09-26-2006 23:22:22




Report to Moderator
 Re: Howard Gem Rotavator: Parts Source? in reply to Mike, 11-07-1998 09:57:02  
: Hello, i am looking for the starter handle for my Gem rotavator it is the old type which is started at the front of the machine. can you help many thanks mario



[Log in to Reply]  [No Email]
[email protected] yvonn

09-14-2005 16:07:07




Report to Moderator
 Re: Howard Gem Rotavator: Parts Source? in reply to Mike, 11-07-1998 09:57:02  
: Hello, I am trying to find a parts source for my two Howard Gems. These are very heavy duty walk behind tillers. They were made in England but not being made anymore. A source for new or used parts or information would be appreciated. Thank You, Mike

someone advertising gearbox in woking newspaper 01483200353.gearbox with wheels �10 dunsfold



[Log in to Reply]  [No Email]
Chester Hudson

08-10-2001 17:07:51




Report to Moderator
 Re: Howard Gem Rotavator: Parts Source? in reply to Mike, 11-07-1998 09:57:02  
I keep an excelent selection of Gem spares and regularly have pattern parts made for them and other British made machines. I have a website www.tillerparts.com. Please ring me on (44) 07836 210363. My address is Heath Close, Old Heathfield, East Sussex, TN21 9BN, England.



[Log in to Reply]  [No Email]
jj Radford

09-06-2003 14:07:11




Report to Moderator
 Re: Re: Howard Gem Rotavator: Parts Source? in reply to Chester Hudson, 08-10-2001 17:07:51  
I am trying to locate a ridging attachment for a Howard Gem, Any ideas ?



[Log in to Reply]  [No Email]
Walter

11-22-2004 16:34:35




Report to Moderator
 Re: Re: Re: Howard Gem Rotavator: Parts Source? in reply to jj Radford, 09-06-2003 14:07:11  
I am looking for a parts manual - for a howard gem rotavator. If you have any information please let me know. Thanks Walter



[Log in to Reply]  [No Email]
Bill Steed

06-24-2003 13:18:07




Report to Moderator
 Re: Re: Howard Gem Rotavator: Parts Source? in reply to Chester Hudson, 08-10-2001 17:07:51  
Have you a magneto wico for a Howard Gem Rotavator, type: A/1483HZ serial no. 985648 If so would you let me know a.s.a.p. the cost, plus post and package. Many thanks.



[Log in to Reply]  [No Email]
Satya DDeo

01-18-2001 12:34:20




Report to Moderator
 Re: Howard Gem Rotavator: Parts Source? in reply to Mike, 11-07-1998 09:57:02  
Hi, I have a rotary hoe, the Gem, work behind, kholre motor, 10Hp, the the reverse gear broken. i looking for the parts for my rotary hoe and if i'm unable to find the parts, i willing to sell my rotary hoe. For more details contact: Satya Deo Sharma Ph: 09-2757578, nz E-mail : [email protected]

: Hello, I am trying to find a parts source for my two Howard Gems. These are very heavy duty walk behind tillers. They were made in England but not being made anymore. A source for new or used parts or information would be appreciated. Thank You, Mike

[Log in to Reply]  [No Email]
Chester Hudson

10-31-1999 04:57:14




Report to Moderator
 Re: Howard Gem Rotavator: Parts Source? in reply to Mike, 11-07-1998 09:57:02  
Heath Close,
Old Heathfield,
East Sussex,
TN21 9BN.
01435 865771 / 0836 210363.

Dear Sir,

I noted your message on the internet for Howard Gem parts.

I keep a large inventory of new and second-hand Gem parts, and can usually do something to help.
I also have made, and had made for me, pattern parts for obsolete Gems.

Yours,

Chester Hudson.



[Log in to Reply]  [No Email]
nigel lewis

10-08-2005 11:05:49




Report to Moderator
 Re: Re: Howard Gem Rotavator: Parts Source? in reply to Chester Hudson, 10-31-1999 04:57:14  
i have just aquired a howard gem rota hoe
it has a peterol parafin jap 1 engine it needs clutch parts and a few engin bits can you help me find them a parts manual would be usefull



[Log in to Reply]  [No Email]
Russell Milne

09-29-2006 03:58:13




Report to Moderator
 The Gem manual in reply to nigel lewis, 10-08-2005 11:05:49  
I have just purchased a GEM rotorvator, 10hp diesel, it is unstopable but I am looking for a service manual so I can keep it in good running condition, can anybody help.



[Log in to Reply]  [No Email]
Mike

10-08-2003 12:44:54




Report to Moderator
 Re: Re: Howard Gem Rotavator: Parts Source? in reply to Chester Hudson, 10-31-1999 04:57:14  
Hello I have a Howard Gem rotavator orange in colour but do not know what year it is. It has a cracked crankcase and I would like to get another engine if possible. I purchased this as is so I have never had it running. I would also like to obtain a handbook. Thanks Mike



[Log in to Reply]  [No Email]
Chuck

02-23-2000 10:27:59




Report to Moderator
 Re: Re: Howard Gem Rotavator: Parts Source? in reply to Chester Hudson, 10-31-1999 04:57:14  
Dear Sir: I need imfo on parts for my Howard Gem---
Do you have a parts catalog or more imformation?
Would appreciate your help with this. Chuck



[Log in to Reply]  [No Email]
Chester Hudson

10-31-1999 04:55:43




Report to Moderator
 Re: Howard Gem Rotavator: Parts Source? in reply to Mike, 11-07-1998 09:57:02  
: Hello, I am trying to find a parts source for my two Howard Gems. These are very heavy duty walk behind tillers. They were made in England but not being made anymore. A source for new or used parts or information would be appreciated. Thank You, Mike



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy