Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Lesser Known Classics Discussion Forum

Power King 1618

Welcome Guest, Log in or Register
Author 
Bwolfe

06-14-2006 10:02:43




Report to Moderator

I have an older power King with a 48" mower Deck. I need to know what size of Belt I need for the Deck. A Diagram would also be helpful to replace the old belt that is broken.




[Log in to Reply]   [No Email]
SJP

11-17-2006 19:22:26




Report to Moderator
 Re: Power King 1618 in reply to Bwolfe, 06-14-2006 10:02:43  
I have a 1614 and a 1612.The 48 in. deck has two belts that drive the outer pulleys,they are about 44 in. long the # is d810045.They are tight fit. The drive belt is 88 in.long,the # is powerated 6889 w2et. It goes on the bottom of the center deck pulley,around two idler puller on the front of the tractor and over the drive pulley on the front of the engine. Make sure vee on belt is in all the pulleys I get my parts from Dave"s Repair Service 1840 Liberty Dr. Williamsport Pa.17701 phone#570 494 1716

[Log in to Reply]  [No Email]
Dave Sherburne NY

06-16-2006 19:23:57




Report to Moderator
 Re: Power King 1618 in reply to Bwolfe, 06-14-2006 10:02:43  
There is a website for these tractors I think it
is homeland tractors. Email this guy, pkjimdandy@gmail.com he will know how to find the
answer to your question. His name is Russ. I don't
have any implements for mine.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy