TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum

Oliver 1950T year & value?

Welcome Guest, Log in or Register

Author

John Zimmerman

09-17-1998 18:56:02

Report to Moderator

I have a Oliver 1950 T I would like to sell but am not sure of the year or actual value. A couple numbers I found on a painted over plate under the dash are----399-22498 204 645-643 Is one of these the serial #? The tractor is in excellent condition,the cab could use a little cosmetic work. I picked it up at an auction early this summer but its just too big for what I need a tractor for. I have been told it has 120HP. Is this accurate?

[Log in to Reply] [No Email]

Dennis H.

09-17-1998 19:32:07

Report to Moderator

Re: Oliver 1950T year & value? in reply to John Zimmerman, 09-17-1998 18:56:02

: I have a Oliver 1950 T I would like to sell but am not sure of the year or actual value. A couple numbers I found on a painted over plate under the dash are----399-22498 204 645-643 Is one of these the serial #? The tractor is in excellent condition,the cab could use a little cosmetic work. I picked it up at an auction early this summer but its just too big for what I need a tractor for. I have been told it has 120HP. Is this accurate? John, If 204645 came off the plate on the lower L hand side of the instument panel, this is a 1968 1950 T. It came in a Wheatland, Riceland, RC and a 4WD model. It should have a Waukesa Turbo, 310 cid with 105.2 PTO HP. Depending on the type, it should weigh 9240-11720 pounds and sold new for $9585 to $12855 MSRP. Dennis H.

[Log in to Reply] [No Email]

John Zimmerman

09-17-1998 19:12:07

Report to Moderator

Re: Oliver 1950T year & value? in reply to John Zimmerman, 09-17-1998 18:56:02

[Log in to Reply] [No Email]

Jeff Oliver

09-28-1998 20:30:38

Report to Moderator

Re: Re: Oliver 1950T year & value? in reply to John Zimmerman, 09-17-1998 19:12:07

: : : I have a Oliver 1950 T I would like to sell but am not sure of the year or actual value. A couple numbers I found on a painted over plate under the dash are----399-22498 204 645-643 Is one of these the serial #? The tractor is in excellent condition,the cab could use a little cosmetic work. I picked it up at an auction early this summer but its just too big for what I need a tractor for. I have been told it has 120HP. Is this accurate?

I recently looked at one like that here ecept it didn'nt have a cab on it. It was a good solid tractor that seemed to be in good condition. The person who had it deals in used trators and he had a priceon it fo $4300 at first and I think it went down to $3995 before it sold. I am in tennesee and am not sure if that made a difference or not.

[Log in to Reply] [No Email]

J Zimmerman

09-29-1998 06:53:53

Report to Moderator

Re: Re: Re: Oliver 1950T year & value? in reply to Jeff Oliver, 09-28-1998 20:30:38

: : : : : I have a Oliver 1950 T I would like to sell but am not sure of the year or actual value. A couple numbers I found on a painted over plate under the dash are----399-22498 204 645-643 Is one of these the serial #? The tractor is in excellent condition,the cab could use a little cosmetic work. I picked it up at an auction early this summer but its just too big for what I need a tractor for. I have been told it has 120HP. Is this accurate?

: I recently looked at one like that here ecept it didn'nt have a cab on it. It was a good solid tractor that seemed to be in good condition. The person who had it deals in used trators and he had a priceon it fo $4300 at first and I think it went down to $3995 before it sold. I am in tennesee and am not sure if that made a difference or not.

Jeff thanks for the info. Iam hoping the value is higher here in Minnesota. My dad and I are trying to sell this tractor and go to one a little smaller with a loader. We looked at a 1750 last week a guy wants to trade with us but we are still looking at other options. We need a tractor we can manuver in the woods with our winch.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy