Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

Ag or hg

Welcome Guest, Log in or Register
Author 
hunza

01-07-2000 07:45:36




Report to Moderator

Please help, I am looking at a 40's cletrac and the owner says it is a ag6, how can I tell and is it possible to put a loader on it.




[Log in to Reply]   [No Email]
Albert Duroe

01-07-2000 16:59:42




Report to Moderator
 Re: ag or hg in reply to hunza, 01-07-2000 07:45:36  
AG-6 cletrac has a continental 226 motor with a distributor that comes out back center of the flat head. I have two AG-6 crawlers one is a WWII military, other one has a trail blazer dozer blade. S0me of them had loaders but they were a complete frame loader built on the outside of the tracks. The HG is much smaller and has a bucket seat.



[Log in to Reply]  [No Email]
tim

01-07-2000 14:56:06




Report to Moderator
 Re: ag or hg in reply to hunza, 01-07-2000 07:45:36  
the hg s are small and i have seen many with cracked and repaired frames from loaders on them, i wouldn't recommend it myself. you would have to add a hydraulic system also. If the machine is a hg it most likely has a hercules ixb3 motor in it the tag on front right side.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy