Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Oliver, Cletrac, Co-op & Cockshutt Tractors Discussion Forum
:

White 2-85 over/under slipping

Welcome Guest, Log in or Register
Author 
Jake in NY

06-17-2007 18:19:44




Report to Moderator

So, we finally got the water pump straightened out and fixed the hydraulic valve. Today I put the side tin back on and hooked on the manure spreader to try it out. Going uphill in 3rd direct it slipped down into under once, but it was after I made it up over the steep part of the hill. Then, coming down off the hill with a now empty spreader in 3rd direct, it slipped 4-5 times. At first, I slapped it into over to regain control, but as I got towards the bottom I decided to let it go and it would coast for 15-20 feet, then catch and then freewheel again.

I didn't check the over/under today but the last day I used it I topped it off and it was maybe a pint or so low.

This tractor has had very little use since we got it in April, due to the water pump fiasco, so I know very little about it.

So, does this mean that I need to rebuild the over/under? At this point, I'm not sure that we want to sink another couple thousand in this tractor.

Thanks,
Jake

[Log in to Reply]   [No Email]
J Schwiebert

06-18-2007 18:23:24




Report to Moderator
 Re: White 2-85 over/under slipping in reply to Jake in NY, 06-17-2007 18:19:44  
Before you jump to all these conclusions, did you check direct and overdrive clutch pressures.



[Log in to Reply]  [No Email]
Don-Wi

06-17-2007 21:15:33




Report to Moderator
 Re: White 2-85 over/under slipping in reply to Jake in NY, 06-17-2007 18:19:44  
These unit's really aren't too bad costwise to have rebuilt. I had the hydra-power unit gone through for my 1600 and it cost about $650, and they replaced the cover on the left side with one from a newer unit that had the external bypass line. That part alone was $150. The rest was very reasonable.

Donovan from Wisconsin



[Log in to Reply]  [No Email]
Jake in NY

06-18-2007 08:17:02




Report to Moderator
 Re: White 2-85 over/under slipping in reply to Don-Wi, 06-17-2007 21:15:33  
When we had the unit on our 1955 FWA rebuilt it cost $2200. I think the service guy said that the used shaft alone is $1400. And this tractor has 6500 hours on it so I wouldn't expect that rebuilding the over/under will be cheap.

Starting to wonder if we're better off selling it and getting something else. I don't think we've put two hours on it since we got it in April because of problems of one sort or another. The last thing we need is another shop queen.

Thanks,
Jake

[Log in to Reply]  [No Email]
m kuhns

06-18-2007 16:29:46




Report to Moderator
 Re: White 2-85 over/under slipping in reply to Jake in NY, 06-18-2007 08:17:02  
Your shaft should only need replaced if the sprag went bad. Under would be inoperative. The least you would need would be a couple seals (cheap), Two sets of clutches ($350 for both sets together) and a sprag ($225). I know there not cheap, but if you can do it yourself if ain't too bad.



[Log in to Reply]  [No Email]
m kuhns

06-17-2007 18:36:58




Report to Moderator
 Re: White 2-85 over/under slipping in reply to Jake in NY, 06-17-2007 18:19:44  
Change you filter once and try it again. You may have to rebuild the over/under. If it doesn't slip in over, the direct clutches are probably worn out.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy