Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Oliver, Cletrac, Co-op & Cockshutt Tractors Discussion Forum
:

77 puller

Welcome Guest, Log in or Register
Author 
ian77

11-04-2006 10:24:30




Report to Moderator

Looking for advice on the best way to build up engine on oliver 77 for pulling, what size sleeves and pistons, stroke, intake, head, ect.
I am new to this but I want to do it right the first time. Any help is appreciated.




[Log in to Reply]   [No Email]
g 1355 puller

11-30-2006 18:57:11




Report to Moderator
 Re: 77 puller in reply to ian77, 11-04-2006 10:24:30  
I still have a 77 that I pull once in a while at antique shows. The cheapest way to get hp for a stock class is to put a 3 5/8 oversize kit in it and stroke it half an inch and a bigger carb in it. All this work cost me around 2500 and getting about 75 horse out of it. I pull it in 4000 up to 6500 stock classes



[Log in to Reply]  [No Email]
luther

11-04-2006 17:05:34




Report to Moderator
 Re: 77 puller in reply to ian77, 11-04-2006 10:24:30  
All depends on what you are going to pull. I pull a stone boat. Only thing I did was to work on the Carb. I beat a lot of tractors with a lot more HP . But we only pull in 1st. That is only fare and it is fun to see the pullers with the big HP cry when they get beat so easy by an Oliver 77



[Log in to Reply]  [No Email]
Bryce

11-04-2006 19:46:20




Report to Moderator
 Re: 77 puller in reply to luther, 11-04-2006 17:05:34  
Come pull on a good clay track with a transfer sled,I just love to pull against the "stock "guys who farmall h ALWAYS got first and just do not understand how they got thier hat handed to them.If you have never gotten last you obviously have not been pulling for very long.



[Log in to Reply]  [No Email]
Mary Kae Repp

02-21-2007 17:15:28




Report to Moderator
 Re: 77 puller in reply to Bryce, 11-04-2006 19:46:20  
I am writing to see if you have any contacts or can help me find a sled for a tractor pull in Spokane Washington. Mike Nettleton of Les Schwab Tires is looking to put on a top notch tractor pull and needs a sled. If you know of anyone or can help him can you please contact him at 509 534 0564 Thanks



[Log in to Reply]  [No Email]
luther

11-05-2006 05:23:55




Report to Moderator
 Re: 77 puller in reply to Bryce, 11-04-2006 19:46:20  
Bryce? If you are talking to me . I'am not sure what you are saying. But I have been pulling Antique tractors for 23 years now. And know that the stuff shirts and little clicks that pull on transfer sleds are lazy and rather dumpb when it comes to know how to set up for pulling real weight. If you like spending 10 bucks to pull once all day that is fine but I will not even put my tractor on a trailer to kill the whole day to pull once.

[Log in to Reply]  [No Email]
Bryce

11-05-2006 07:03:27




Report to Moderator
 Re: 77 puller in reply to luther, 11-05-2006 05:23:55  
All pulling is real pulling,the problem is when one type of puller looks down his nose at the other types of pullers be it garden tractors,farm stocks,antiques,modifieds or even trucks.We are all in the same sport it is just that some of us remember that we are in it for fun and others do not.As far as lazy,well I guess if me being one of the first ones there at the pull to help set up the P.A. system,scales,puling sled and being one of the last ones to leave after packing it all up again,then call me lazy. 10 bucks to hook once?All day? If you have been doing this for 23 years surely you would know that almost everywhere allows at LEAST 2 hooks and many places alot more.At our club pulls you can hook 3,4,5 times.Ever been to an NATPA pull?I've seen people pull four times at these events.I have also met some of the nicest people at antique pulls so I am not sure where you are finding all of these stuff shirts and little chicks.Just one question,I read your post and I was wondering,what does dumpb mean?

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy