TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum

Need Oliver "60" parts and info

Welcome Guest, Log in or Register

Author

Tom Nunn

08-17-1998 19:25:24

Report to Moderator

I just bought a 1946 "60" and need fenders and side covers and the part that connects the two pedals, the lights and lenses. I also am having a hard time finding sleeves and pistons.it has a 3 5/16 bore , 3 1/2 stroke and is a 120.5 Cubic inches designation is an HC 6 to 1 compression
ratio I am in big rapids MI 616 823 2296 any help will be appreciated

[Log in to Reply] [No Email]

rod hergott

11-15-1998 08:25:51

Report to Moderator

Re: need Oliver "60" parts and info in reply to Tom Nunn, 08-17-1998 19:25:24

: i am from millet, alberta canada. there are reasonable shape fenders here but the cost of shipping them to you might be prohibitive. email me to discuss.

I just bought a 1946 "60" and need fenders and : side covers and the part that connects the two : pedals, the lights and lenses. I also am having : a hard time finding sleeves and pistons.it has a : 3 5/16 bore , 3 1/2 stroke and is a 120.5 Cubic : inches designation is an HC 6 to 1 compression
: ratio I am in big rapids MI 616 823 2296
: any help will be appreciated

[Log in to Reply] [No Email]

rod hergott

11-15-1998 08:18:58

Report to Moderator

Re: need Oliver "60" parts and info in reply to Tom Nunn, 08-17-1998 19:25:24

: I just bought a 1946 "60" and need fenders and : side covers and the part that connects the two : pedals, the lights and lenses. I also am having : a hard time finding sleeves and pistons.it has a : 3 5/16 bore , 3 1/2 stroke and is a 120.5 Cubic : inches designation is an HC 6 to 1 compression
: ratio I am in big rapids MI 616 823 2296
: any help will be appreciated

[Log in to Reply] [No Email]

rod hergott

11-15-1998 08:18:27

Report to Moderator

Re: need Oliver "60" parts and info in reply to Tom Nunn, 08-17-1998 19:25:24

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy