Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Oliver, Cletrac, Co-op & Cockshutt Tractors Discussion Forum
:

Oliver 2150 finally!!!

Welcome Guest, Log in or Register
Author 
Matt Page

09-27-2006 11:18:44




Report to Moderator

Well... finally going to get the 2150 thats been messing up my sleep and interfering with my work for the last six months. How does $1500 sound??? Has ROP, three point, 540 pto, and a dozer blade on the front. Been sitting several years and started right up. Steering doesn't work, hydraulic lift on the blade was slow, and the guy didn't even know it had a over under or what it was, so I don't know about that. I didn't drive it because of the steering. Has the planetary rear end, tin is good, the screen is burned/rusted out beside where the exhaust is, and it'll need a new front and rear tire. What do you guys think? Should be O.K. and that price huh? I'm sure I'll be bugging you pretty regular now... First obstacle is getting it loaded without steering, it will hang nine inches off each side of the dual tandem trailer, and hauled about twenty miles with a one ton pickup. Scheduled for Saturday after working cows. Matt.

[Log in to Reply]   [No Email]
Shep Va

09-28-2006 05:10:41




Report to Moderator
 Re: Oliver 2150 finally!!! in reply to Matt Page, 09-27-2006 11:18:44  
third party image

Does it look like mine???

That is a great deal and a great tractor, you will really like it. If you have questions let me know, I have been inside and out of mine a few times and can probably tell you what not to do.....

The best thing I did to mine was putting a Cummins engine in it and cranking up the power a little.

My 2150 is actually getting new tires today. Putting on Firestone power lug radials all the way around. The darn tires cost nearly what the tractor is worth. Oh well, it does not do anyone any good without tires.....

Great find, you will love it.

[Log in to Reply]  [No Email]
Matt Page

09-28-2006 07:16:56




Report to Moderator
 Re: Oliver 2150 finally!!! in reply to Shep Va, 09-28-2006 05:10:41  
Two wheel drive, with a big old Oliver canopy and a dozer blade on front. Dozer blade is bent, hard to imagine pushing that hard...



[Log in to Reply]  [No Email]
Matt Page

09-28-2006 06:23:01




Report to Moderator
 Re: Oliver 2150 finally!!! in reply to Shep Va, 09-28-2006 05:10:41  
Two wheel drive, with a big old Oliver canopy and a dozer blade on front. Dozer blade is bent, hard to imagine pushing that hard...



[Log in to Reply]  [No Email]
Rich Scheller

09-28-2006 04:41:35




Report to Moderator
 Re: Oliver 2150 finally!!! in reply to Matt Page, 09-27-2006 11:18:44  
Matt - Kent,
Let me know if you need any help with your Olivers, I use a LP M670 MM and a White 2-155 on my ranch in Palestine. Just finished replacing all four power steering hoses under the console on the White. I am not the sharpest knife in the drawer, but neither one of the tractors has stumped me yet.
Rich



[Log in to Reply]  [No Email]
Iowa Oliver

09-27-2006 19:18:29




Report to Moderator
 Re: Oliver 2150 finally!!! in reply to Matt Page, 09-27-2006 11:18:44  
Good for you. Be sure your trailer is heavy enough. It is a very rare and heavy tractor.Do you have the narrow rubber on the rear or the 24.5x 32 rice tires on it? I have a Wheatland model. Engine is the same as what what used in the White 2-135 & 2-155 tractors.Only about 1400 of the 2050 and 2150 tractors were made. It is a brute of a tractor.



[Log in to Reply]  [No Email]
MH

09-27-2006 12:04:17




Report to Moderator
 Re: Oliver 2150 finally!!! in reply to Matt Page, 09-27-2006 11:18:44  
Boy, I'll say you did pretty good for that price. Join the club of questions askers...(I'm one of them)
Matthew



[Log in to Reply]  [No Email]
MikeOwi

09-27-2006 11:51:41




Report to Moderator
 Re: Oliver 2150 finally!!! in reply to Matt Page, 09-27-2006 11:18:44  
Nice deal! I would have jumped all over that one also since I already have one. Check the hydraulics to make sure there is oil in it. My dad ran mine without oil and the pump has never been the same. In fact it is getting the pump replaced shortly. The steering could be the valve next to your left foot when you sit on it. Do you mind letting us know about what part of the country you found this deal?

[Log in to Reply]  [No Email]
Matt Page

09-27-2006 12:01:43




Report to Moderator
 Re: Oliver 2150 finally!!! in reply to MikeOwi, 09-27-2006 11:51:41  
East Texas, I guess not many people around here are familiar with Olivers (including myself) or have a use for a tractor that big. The guy said he never could find anyone that knew anything about it to work on it. I was thinking about this site and that even if I didn"t know anything about it I had access to about all the information there was... Hope it"s not a TOTAL project... Matt.



[Log in to Reply]  [No Email]
kent

09-27-2006 12:40:03




Report to Moderator
 Re: Oliver 2150 finally!!! in reply to Matt Page, 09-27-2006 12:01:43  
hi matt---where are you in east texas?---i'm in palestine---i am always looking for super 55's & 550's---let me know if you run across any---thanks
kent



[Log in to Reply]  [No Email]
Matt Page

09-27-2006 13:06:28




Report to Moderator
 Re: Oliver 2150 finally!!! in reply to kent, 09-27-2006 12:40:03  
Corrigan, we're neighbors... I'll let you know, but to tell you the truth this is the only Oliver I've ever seen around here.



[Log in to Reply]  [No Email]
EVILBOWEVIEL

09-27-2006 11:44:25




Report to Moderator
 Re: Oliver 2150 finally!!! in reply to Matt Page, 09-27-2006 11:18:44  
Sounds like you bought the blade and got the tractor for free
Ron



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy