TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Oliver, Cletrac, Co-op & Cockshutt Tractors Discussion Forum

Buda 273 block/ 262 crank stroker motor

Welcome Guest, Log in or Register

Author

Tony Sha

06-04-2006 07:56:05

Report to Moderator

I'm building a big inch Buda and I need to know if anyone knows who makes pistons for this combination??? My block is already .060 over and has rusty walls so I will have to bore to .090 or .125, is this safe? Also, I have heard that the diesel cam will give a little more air. Has anyone researched lift and duration on the various camshafts? I guess I'm just a hot rod farmboy! Thanks for the help!

[Log in to Reply] [No Email]

moli

06-06-2006 19:17:59

Report to Moderator

Re: Buda 273 block/ 262 crank stroker motor in reply to Tony Sha, 06-04-2006 07:56:05

Glad to see someone wants to build up them budas..I built up my cockshutt 50 a few yrs back..ended up with 3 7/8 X 4 3/4...APROX 336 CID.. Lots a fun..crap i still got paper work on er too..( the motor)im not positive but i think i still have the job card # from ROSS pistons..send me an e mail and ill try to find the papers..im workin on a friends 40 now..he wants some cubes,its gonna cost him tho..I got 115 hp outta er on a dyno at 2000 rpm..2nd and 3rd gear in the 7500,8500 n 9500 lb classes...steve

[Log in to Reply] [No Email]

krm

06-05-2006 06:51:43

Report to Moderator

Re: Buda 273 block/ 262 crank stroker motor in reply to Tony Sha, 06-04-2006 07:56:05

contact Keith at [email protected],he will know.I think you have to use the 262 cam with the 262 crank because of clearence problems.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy