Oliver 1800 Series

I�m looking at an 1800 that is for sale near here. Not having seen it since I received your information, it must be a Series A or B.

I�d still like to find out what I�d be up against in changing out the PTO implement shaft. About an inch and a half is gone!! Otherwise it seems to be a good piece.

Thanks again for the help.

Putt Putt

As a note, the rock shaft housings should interchange, although it would require use of the lines from a series C to adapt to the earlier models if power steering equipped.

Series "A" are from S/N 90 525 to 124 395. Gas & LP are 265 Cu In and Diesel is 283 Cu In. Rated RPM is 2000. Visual identification: Has a decal on the hood sides that had a checkerboard design, non tiltable steering column with the throttle on the steering column.

Series "B" are from S/N 124 397 to 134 683. Gas and LP are 283 Cu In and Diesel is 310 Cu In. the rated RPM is 2200. Visual identification: Has the metal placard attached to the hood sides, non tiltable steering column with the throttle on the steering column.

Series "C" are from S/N 136 501 to 149 818. Same displacement and rated RPM as series "B". The transmission now has a pressure lubrication system. Visual identification: Has the metal placard on the hood sides and a tiltable steering column (W/Power steering). Throttle is located on the side of the dash.

This is a small overview, there are many small changes in the tractors.