Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Oliver, Cletrac, Co-op & Cockshutt Tractors Discussion Forum
:

Anyone got one? or seen one for that matter?

Welcome Guest, Log in or Register
Author 
j meyer

03-18-2006 21:16:11




Report to Moderator

Oliver part number is:20-0007856

Man, these gotta be the rarest of Oliver stuff, worse then the roll bars!




[Log in to Reply]   [No Email]
j meyer

03-19-2006 08:09:47




Report to Moderator
 Re: Anyone got one? or seen one for that matter? in reply to j meyer, 03-18-2006 21:16:11  
I know darn well that these are the Moline suitcase with the MM deleted off, and they are extremely hard to find. Oddly enough on it all- we bought a 1755 in 2001(few pry remember me talking about our 5.9 Cummins rig) and all we got out of the shop owner is that this tractor was one-owner from Iowa. Last year I got hired on at an Agco dealer in SE Minnesota- near the boarder and I got shooting the breeze with the salesman on our Olivers since he worked for an Moline/Oliver/White dealer in NE Iowa originally, and he said his father inlaw had a nice 1755 that threw a rod. I showed him a picture of "ours" and he confirmed, that tractor was originally theres and he sold it new!!! Those weights came off that 1755 we bought, but he kept, and now he is selling most of his stuff off, and gave me a chance at "some Oliver weights" I thought they were stackers by how he described them, but when arriving, its discovered it to be much better! LOL, somedays it goes that way. Anywho, I know they are the same as the MM casted ones, and maybe I should cut the chase short and call a guy on the other side of town that has a pile of them there in his shed. He'll pry sell off the pile if theres extras besides. Thanks for the replies so far!!!

[Log in to Reply]  [No Email]
J. Schwiebert

03-19-2006 05:34:24




Report to Moderator
 Re: Anyone got one? or seen one for that matter? in reply to j meyer, 03-18-2006 21:16:11  
Come on here. If it has a 20 prefix to the part number the part number is a basic Moline part number. I also noticed it is painted grey. We had suitcase weights around there before I left in 76.



[Log in to Reply]  [No Email]
iowa_1650

03-19-2006 04:07:05




Report to Moderator
 Re: Anyone got one? or seen one for that matter? in reply to j meyer, 03-18-2006 21:16:11  
I've got 4 of them and the starter weight on my 770. Purchased them at a sale a few years ago, they were on 1655. There were also about 10 of the Minn Mo style of these weights on an auction a couple of weeks ago. Had the same shape and handles, just had M/M cast in the side.



[Log in to Reply]  [No Email]
Don-Wi

03-18-2006 22:54:12




Report to Moderator
 Re: Anyone got one? or seen one for that matter? in reply to j meyer, 03-18-2006 21:16:11  
I actually never new they existed until you said you bought a set, and I never saw any until just now. I think you've diffinately got the rarest of the rare in your hands.
Donovan from Wisconsin



[Log in to Reply]  [No Email]
j meyer

03-18-2006 21:17:37




Report to Moderator
 Re: Anyone got one? or seen one for that matter? in reply to j meyer, 03-18-2006 21:16:11  
Picture is in the photo section of the Oliver pictures- its an Oliver suitcase weight....someone that knows what they are doing can attach the photo if they are so kind.



[Log in to Reply]  [No Email]
FRANK THILTGEN

03-18-2006 21:39:53




Report to Moderator
 Re: Anyone got one? or seen one for that matter? in reply to j meyer, 03-18-2006 21:17:37  
you can find them on back of a white 7300 combine good luck



[Log in to Reply]  [No Email]
j meyer

03-18-2006 21:42:20




Report to Moderator
 Re: Anyone got one? or seen one for that matter? in reply to FRANK THILTGEN, 03-18-2006 21:39:53  
They attached them onto the rear axles of combines??? I did see a 7300 stacked pretty high of Oliver slab weights- pry around 10 weights on there, and it pry would have been worth buying that combine just to get the weights, and re-dump the rest. Huh, hear new stuff everyday.



[Log in to Reply]  [No Email]
FRANK THILTGEN

03-19-2006 08:00:47




Report to Moderator
 Re: Anyone got one? or seen one for that matter? in reply to j meyer, 03-18-2006 21:42:20  
this combine has the sucase weights on it but he has 7600 with no brackit for weights. he won't sell them i tried to buy them for my tractor



[Log in to Reply]  [No Email]
Adam Suess

03-18-2006 21:24:44




Report to Moderator
 Re: Anyone got one? or seen one for that matter? in reply to j meyer, 03-18-2006 21:17:37  
third party image

I've never seen one.



[Log in to Reply]  [No Email]
j meyer

03-18-2006 21:39:49




Report to Moderator
 Re: Anyone got one? or seen one for that matter? in reply to Adam Suess, 03-18-2006 21:24:44  
Hi Adam-
I talked to your friends at Judson and they gave me a run-around on those weights, and they accused me of being a tractor puller(i asked if they had any). I got pretty P.O.'ed at them.



[Log in to Reply]  [No Email]
Marc Smothers

03-19-2006 16:35:40




Report to Moderator
 Re: Anyone got one? or seen one for that matter? in reply to j meyer, 03-18-2006 21:39:49  
I've got 13 of them, one has the ear broke off. Didn't know they were that rare, quite a few around here in N.E. Ohio. Gonna' make me go looking for them for you guys..... Marc



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy