Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Oliver, Cletrac, Co-op & Cockshutt Tractors Discussion Forum
:

Got any pics(wheelie bar/weight bracket rear)

Welcome Guest, Log in or Register
Author 
Jak

02-27-2006 14:37:27




Report to Moderator

I have a Super 88 I am redoing the rear weight bracket and wheelie bars.I bought some square tubing and angle iron and some flat steel(expensive).I am taking the live pto off and hydraulics too.I want some ideas other than my own.Thanks fellas,Jack(TN).




[Log in to Reply]   [No Email]
Jeff Oliver

02-27-2006 14:57:33




Report to Moderator
 Re: Got any pics(wheelie bar/weight bracket rear) in reply to Jak, 02-27-2006 14:37:27  
If I can find hem I should have some pictures I have taken as pulls of hitches /bars/ brackets. Taking the hydraulics off huh? Still need those aluminum gears?? LOL!!!!



[Log in to Reply]  [No Email]
Jak

02-28-2006 09:35:40




Report to Moderator
 Re: Got any pics(wheelie bar/weight bracket rear) in reply to Jeff Oliver, 02-27-2006 14:57:33  
I would go all aluminum gears but with that big Gingrich engine I am afraid I would strip them.Ha ha.Jack



[Log in to Reply]  [No Email]
Jeff Oliver

02-28-2006 10:28:47




Report to Moderator
 Re: Got any pics(wheelie bar/weight bracket rear) in reply to Jak, 02-28-2006 09:35:40  
no prob. I have some Titanium laying around in the scrap pile. It will take a little more machining but we'll just make them out of that. they'll hold that motor. You did get the 500+ ci, one right?? :)



[Log in to Reply]  [No Email]
Jak

02-28-2006 11:23:01




Report to Moderator
 Re: Got any pics(wheelie bar/weight bracket rear) in reply to Jeff Oliver, 02-28-2006 10:28:47  
Sure did!Man I got to get them wheelie bars done but there is always something that comes up just when I get started.The paint and bodywork I am into right now was severly underpriced by me,it has been time consuming and there were waves that mysteriously showed up when the block sander hit it.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy