Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Oliver, Cletrac, Co-op & Cockshutt Tractors Discussion Forum
:

Using silver metallic paint on Head Gaskets

Welcome Guest, Log in or Register
Author 
Mike in MI

01-31-2006 18:20:37




Report to Moderator

I had the head ground and the top of the block was within .003 to .005. And it still seeped after a period of time. Has anyone ever tryed this or heard of anyone doing this? I painted the head gasket on my 880 years back and now I don't see any seeping around the head and block area. Before it would seep oil around the head gasket on the oil gallery return side (push rod side)of he head.
Just my ways of doing it at the time.
Mike

[Log in to Reply]   [No Email]
Keith-OR

01-31-2006 22:15:14




Report to Moderator
 Re: Using silver metallic paint on Head Gaskets in reply to Mike in MI, 01-31-2006 18:20:37  
Yeppers Mike. Motors manual says to do this on Ford 272, 292 and 312 engines. I have been doing this for better than 40 yrs now.JMO

Keith & Shawn



[Log in to Reply]  [No Email]
Mikein MI

01-31-2006 18:32:23




Report to Moderator
 Sorry about that in reply to Mike in MI, 01-31-2006 18:20:37  
Ihit the back button by mistake.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy