Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Oliver, Cletrac, Co-op & Cockshutt Tractors Discussion Forum
:

HEY PADave

Welcome Guest, Log in or Register
Author 
VADAVE

01-27-2006 14:24:08




Report to Moderator

Was at the farm last couple of days and measured the canopy/rollbar.
The base is a plate 1 inch thick drilled to match all 6 of the holes in the axle pad.
The rest of the rollbar is 2 X 5 inch, 1/4" thick tube. Total height is 70". The uprights are welded to the base plates on top of the inner most hole and rake back 7" at the top of the fenders, 34". The uprights are 70" apart at the top. The canopy supports are 2" outside of the uprights.
The fenders are mounted on top of the base plate and bolts go all the way through to the bottom of the axle. Total of 4 bolts.
By the way there is a picture of this tractor on "Tractor Pics".

[Log in to Reply]   [No Email]
Hey VA DAVE

01-28-2006 08:40:35




Report to Moderator
 Re: HEY PADave in reply to VADAVE, 01-27-2006 14:24:08  
yhanks for the info,that pretty well covers my questions. now all i need is materal, I'll be looking at the pics Thanks So Much Pa Dave



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy