Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Oliver, Cletrac, Co-op & Cockshutt Tractors Discussion Forum
:

Valve settings?

Welcome Guest, Log in or Register
Author 
Nick in Kansas

03-28-2005 17:24:01




Report to Moderator

Does anyone know what the valves need to be set on my 550 Cockshutt? Finally got the head gasket in, and it runs okay, but I would like to set the valves before I finish putting the hood and all the sheet metal back on.
Thanks Ncik




[Log in to Reply]   [No Email]
Nick in Kansas

03-29-2005 04:45:36




Report to Moderator
 Re: Valve settings? in reply to Nick in Kansas, 03-28-2005 17:24:01  
Sorry, forgot to say it is a diesel. Yea, I have run it a little less the half an hour, was going to recheck the head bolts. Thanks John for the reminder, and the response.
Nick



[Log in to Reply]  [No Email]
J. Schwiebert

03-28-2005 17:54:44




Report to Moderator
 Re: Valve settings? in reply to Nick in Kansas, 03-28-2005 17:24:01  
It is a gas engine the intake and exhaust are set at 0.015. A word of advice. If you have not done this run the engine at least a half hour and recheck the torques on the head bolts and then set the valves. Questions?



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy