Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Oliver, Cletrac, Co-op & Cockshutt Tractors Discussion Forum
:

Late model 770

Welcome Guest, Log in or Register
Author 
bluediesel

02-08-2005 19:35:27




Report to Moderator

Are the flat top fenders normally mounted to the outside of the support plate(closer to the tire), or to the inside which would give you less room mounting the tractor. My 770 (when purchased} was the same "as shown" in the 770/880 parts manual page 1-23, which may be an illusion, the left outside and the right inside. What is correct?




[Log in to Reply]   [No Email]
bastar

02-08-2005 19:56:29




Report to Moderator
 Re: Late model 770 in reply to bluediesel, 02-08-2005 19:35:27  
For what it is worth, the photos in the literature show the fenders on the inside of the supports.



[Log in to Reply]  [No Email]
bluediesel

02-08-2005 20:45:26




Report to Moderator
 Re: Late model 770 in reply to bastar, 02-08-2005 19:56:29  
Thanks, I could not find a good view of it in the books I've got, and there's not to many of these in Chicago to look at, Thanks again.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy