Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Oliver, Cletrac, Co-op & Cockshutt Tractors Discussion Forum
:

Super 88 Bosch Injection Pump Seal

Welcome Guest, Log in or Register
Author 
Ed (KS)

09-24-2004 18:23:43




Report to Moderator

I was wondering if any of you might be able to walk me through the steps to replace the shaft seal on the control (or fulcrum) shaft of the governor. My IT shop manual doesn't cover it. The blowup shows a tiny snap ring, but it looks to be behind the seal. Thanks! Ed




[Log in to Reply]   [No Email]
J. Schwiebert

09-25-2004 04:55:10




Report to Moderator
 Re: Super 88 Bosch Injection Pump Seal in reply to Ed (KS), 09-24-2004 18:23:43  
99% of the time when the seal is shot the two bearings supporting the shaft are also shot, This keeps the seal from being centered and then it leaks. Do you have the governor off? Want more details send me a U. S. mail address. Or do you have a friend who belongs ot the Cockshutt club? I had an article about that in there newsletter a little over a year ago.



[Log in to Reply]  [No Email]
krm

09-25-2004 12:15:44




Report to Moderator
 Re: Super 88 Bosch Injection Pump Seal in reply to J. Schwiebert, 09-25-2004 04:55:10  
Mr.Schwiebert I remember you were going to write a
piece for the Cockshutt Quarterly about the changing seal on the throttle shaft,but I never did see it in the quarterly.If you would I would like to have a copy of the procedure so I could replace mine.Kenny



[Log in to Reply]  [No Email]
J. Schwiebert

09-25-2004 14:38:05




Report to Moderator
 Re: Super 88 Bosch Injection Pump Seal in reply to krm, 09-25-2004 12:15:44  
Kenny: You are correct. I went out of town then and Mr McClure and I never got back together on it. My computer also died and I had to get a new one last week so I need to start over from scratch with the complete article. Post your message on the Hart/ParrOliver site and I will send you a Personal message on how we can contact each other. Two years ago the kit to do it was close to $50.00. You do need a very small pair of Tru-Arc snap ring plies and a 1/4 inch drive 7/16 universal socket also makes the job easier.

[Log in to Reply]  [No Email]
Ed (KS)

09-25-2004 10:46:34




Report to Moderator
 Reply to J. Schwiebert in reply to J. Schwiebert, 09-25-2004 04:55:10  
J. can you click on my post and send me an email that I can respond to, so I don't have to post my full name and address on the web. Too many scammers out there. Regards! Ed



[Log in to Reply]  [No Email]
J. Schwiebert

09-25-2004 14:39:33




Report to Moderator
 Re: Reply to J. Schwiebert in reply to Ed (KS), 09-25-2004 10:46:34  
Ed: Follow the same instructions as what I gave Kenny.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy