Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Oliver, Cletrac, Co-op & Cockshutt Tractors Discussion Forum
:

Cockshutt 1900 Screamin' Jimmy

Welcome Guest, Log in or Register
Author 
Rusty

06-03-2004 16:55:20




Report to Moderator

Hello,
My friend has a 1900 Cockshutt with a 2-cycle GM diesel in it. He said I could borrow it for our local vintage pulls. Our local pulls allow stock tractors as new as 1960. My question is, Is this tractor old enough?
How much did these tractors approx. weigh?

thanks,
Rusty




[Log in to Reply]   [No Email]
josh upton

06-16-2004 09:24:58




Report to Moderator
 Re: Cockshutt 1900 Screamin' Jimmy in reply to Rusty, 06-03-2004 16:55:20  
White didn't acquire cockshutt till 1962 so thats the oldest it could be. The book says 10,900 dry weight. Mine weighs about 12000 with some chloride in the tires. We are just finishing rebuilding it. Should be firing the motor this weekend.



[Log in to Reply]  [No Email]
Andrew

06-07-2004 20:30:53




Report to Moderator
 Re: Cockshutt 1900 Screamin' Jimmy in reply to Rusty, 06-03-2004 16:55:20  
our 1900 at our farm is 14, 000 and some lbs pulls good to 30 feet stomps right along sounds good to hear it a hole mile away.....



[Log in to Reply]  [No Email]
Sam M

06-04-2004 06:22:22




Report to Moderator
 Re: Cockshutt 1900 Screamin' Jimmy in reply to Rusty, 06-03-2004 16:55:20  
Assuming Oliver and Cockshutt had same production years , a book I have on Olivers by Larry Gay ( A guide to Harr Part , Oliver and White Tractors 1901 to 1996 - American Society of Ag Engineers) indicates prodution of the Oliver 1900 (A) began in the summer of 1960 and continued with the 1900 (C) until 1964 . The GM two cycle engine was 212 cubic inch 4 cylinder model , the GM 4-53 .



[Log in to Reply]  [No Email]
John

06-03-2004 18:23:59




Report to Moderator
 Re: Cockshutt 1900 Screamin' Jimmy in reply to Rusty, 06-03-2004 16:55:20  
Rusty:

These tractors were made between 1960-1963 (if I'm not mistaken...this was oliver production years). Mine weighed 9500#.

John



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy