Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

Cockshutt 570 Three point cylinder size

Welcome Guest, Log in or Register
Author 
Scotto

12-07-2002 19:59:38




Report to Moderator

I have a Cockshutt 570 that has the three point but did not have a cylinder on it when I got it. I would like to buy a new one but I don't know the bore and stroke required. If any one has these dimensions, I would be most thankful.




[Log in to Reply]   [No Email]
Wade

12-08-2002 13:28:47




Report to Moderator
 Re: Cockshutt 570 Three point cylinder size in reply to Scotto, 12-07-2002 19:59:38  
I measured my Cockshutt cylinder. From center of pins: 20.5 inches closed, 28.25 inches open.



[Log in to Reply]  [No Email]
Scotto

12-08-2002 18:44:17




Report to Moderator
 Re: Re: Cockshutt 570 Three point cylinder size in reply to Wade, 12-08-2002 13:28:47  
Thanks for the info, it is a big help!

Regards,

Scotto



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy