Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

1855 project tractor

Welcome Guest, Log in or Register
Author 
Brad

08-14-2002 17:00:52




Report to Moderator

I just picked up an 1855,the guy said it was the last one built.I haven't checked the serial # yet.The tractor was overhauled 3 yrs ago in the fall;new turbo reworked head new clutch,new radiator,new crank! the guy got it out that spring to do field work put 20 hours on it and threw a rod out the side.so it has sat for 2 yrs.it has a year round cab,oliver fenders new hyd.pump just b4 the motor was done.the tin is perfectly straight and it has 80% radials no checking.... $1500.00 is this a reasonable price? I thought it was.

[Log in to Reply]   [No Email]
B A Star

08-15-2002 22:44:04




Report to Moderator
 Re: 1855 project tractor in reply to Brad, 08-14-2002 17:00:52  
If this 1855 is the last one built it is serial number 255 785 685, it was built on Jan 14 1975.



[Log in to Reply]  [No Email]
ShepFL

08-15-2002 05:59:42




Report to Moderator
 Re: 1855 project tractor in reply to Brad, 08-14-2002 17:00:52  
BUY IT NOW!!
I have been looking for a big Ollie down here in my neck of the woods. Ollies are somewhat scarce.
Heck the tires are worth that!!

I groveled over a sweet Super 99 sitting in Ocala, I seen in the Hauling schedule it is going to OH.

I have been seeking an 1850 to repower as funds come available. Still in the weeds. . .

Best of luck and let us know how things work out!



[Log in to Reply]  [No Email]
big M

08-14-2002 23:01:49




Report to Moderator
 Re: 1855 project tractor in reply to Brad, 08-14-2002 17:00:52  
Buy it today.



[Log in to Reply]  [No Email]
Brad

08-14-2002 19:26:29




Report to Moderator
 Re: 1855 project tractor in reply to Brad, 08-14-2002 17:00:52  
thanks for the response, does anyone know of or have a cooler block for this tractor? this one has a hole from the bottom of the sleeve to the pan behind the starter,the rod broke in half so hopefully the crank is ok.thanks again



[Log in to Reply]  [No Email]
COWBOY

08-14-2002 17:52:48




Report to Moderator
 Re: 1855 project tractor in reply to Brad, 08-14-2002 17:00:52  
Howdy,...

Do you feel guilty buying that tractor???? I thought I was the only person who got great deals on old Olivers.

The 1855 may have a White 2-105 rear end. You can tell easily by looking at the Axle Housings. If they are big and square, then it is the late model 1855. All the other earlier ones had round axle housings at the end.

The engine should have a built in Oil Cooler if it is a late model one. It is on the Right side of the engine as you sitting on the tractor.

I have one of the last 1855's built and I can tell you that they are Great. But when it was overhauled, they must not of put in the updates. If the updates ar installed, it will eliminate the engine throwing a rod.

I have a pic of mine in the Oliver Photo Section. Search for 1855 Oliver and you will find it.

I can give you more info on rebuilding it and what and what not to do.

Good Luck!

[Log in to Reply]  [No Email]
Sam M

08-15-2002 10:24:42




Report to Moderator
 Re: Re: 1855 project tractor in reply to COWBOY, 08-14-2002 17:52:48  
If the engine on this tractor does not have the oil cooler on the right side of the engine underneath the oil filter and the updates I do not believe it was one of the last 1855s built . my understanding is that , at some point in time before production ended on the 1855 , the oil cooler and updates became part of the standard engine put into the tractor .

This tractor sounds like a good buy to me . Personally I would not try to do anything with the block that you now have on this tractor . But that is just my opinion worth what you paid for it . Others may say fix the hole and then rebuild the engine . You might want to contact Shep who is on this web site a lot . Shep recently did a repower (I think a Cummings engine ) and a rework and repain of an 1855 with a cab which turned out beautifully . I think Shep has some picturses of the tractor and the rework on his web site . For his e mail address see the discussion on this page about the 2255 Oliver .

[Log in to Reply]  [No Email]
M kuhns

08-14-2002 17:47:14




Report to Moderator
 Re: 1855 project tractor in reply to Brad, 08-14-2002 17:00:52  
I'd jump on it! THe tires are just about worth that alone. You could weld the block up if the rod flew out of the left side or patch it. We did this to some of our 310's that threw a rod. If not I'd just drop a 5.9 cummins in it. If not let me know. I'd like a good but cheap tractor to put a 5.9 in.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy