Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

Oliver Combine

Welcome Guest, Log in or Register
Author 
Nick

01-10-2002 18:33:04




Report to Moderator

I found a oliver model 25 combine. I could by it for $100. Is that a good deal? It has been sitting out side for a couple of years. Does anyone have any information on these combines?




[Log in to Reply]   [No Email]
Canada Grant

01-13-2002 08:51:45




Report to Moderator
 Re: Oliver Combine in reply to Nick, 01-10-2002 18:33:04  
In the jan/feb hartparr oliver collectors magazine there is an article on these oliver built combines,built 1961-1963 . They were also made for ford under contract.painted red at first and then blue later. The production ended when cockshutt was bought out and they used the 430/431 of cockshutts design. After that takeover oliver design was dropped and they used cockshutt . Quite an interesting article.

[Log in to Reply]  [No Email]
Paul Stanley

01-13-2002 09:56:14




Report to Moderator
 Re: Re: Oliver Combine in reply to Canada Grant, 01-13-2002 08:51:45  
It was interesting to see how White kinda pulled the rug out from underneath the Oliver engineers developing the Oliver combine.



[Log in to Reply]  [No Email]
canada Grant

01-13-2002 14:44:41




Report to Moderator
 Re: Re: Re: Oliver Combine in reply to Paul Stanley, 01-13-2002 09:56:14  
From the article cockshutt was way ahead even to the rotory 9700 white that was on the drawing board in 1959 !!! In western canada you can see the odd Cockshutt 428 still plugging along and how many 33/40,s are still in use ? Just in this neighbourhood there is one 40 still in use ,a 422 cockshutt pulltype and a few 18 pulltypes . A lot of 535/545 machines through to 7600/8600 but there is a lot of small grain in this area and these still do a good job. For a $100 a 25 would be fun to have but get it hid under a roof ! What I can,t see is what they used for a motor ? Chysler ? It was a continental in the 40.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy