Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

Found620OliverBaler.......AnybodyWantOne

Welcome Guest, Log in or Register
Author 
DuaneW

11-01-2001 04:13:23




Report to Moderator

I live In Ashville Oh, There is a really clean looking 620 baler sitting along the road for sale. I don't know what they are asking for it nor have I been up close to it. Does not look like the paint is even worn off of the pickup on it. If anyone is interested I will try to find more info. Also, are parts hard to find for oliver balers and were they any good. Always had oliver tractors, never much else though. Duane Warnock.

[Log in to Reply]   [No Email]
Dale

12-07-2001 16:51:30




Report to Moderator
 Re: Found620OliverBaler.......AnybodyWantOne in reply to DuaneW, 11-01-2001 04:13:23  
We just purchased a 620 baler but are looking for a manual. Anyone have or no where we can locate a manual?

Thanks.



[Log in to Reply]  [No Email]
Alan Farley

11-06-2001 08:31:54




Report to Moderator
 Re: Found620OliverBaler.......AnybodyWantOne in reply to DuaneW, 11-01-2001 04:13:23  
I saw a 620 Oliver balier sell for $250 at a auction last spring about 50 miles east of Ashville, it was in fair-good shape, it was missing parts from the chute, etc. It was a old Oliver dealership, that still worked worked on Olivers, and sold used Olivers,Whites MM's until last spring. Stacks upon stacks of fairly rare equipment manuals sold. Had a few 550's, 1650,1850,77's,60's there. I got out-bid on a nice Oliver 3-14" 3 pt. plow that brought $350.

[Log in to Reply]  [No Email]
DuaneW

11-03-2001 04:02:22




Report to Moderator
 Re: Found620OliverBaler.......AnybodyWantOne in reply to DuaneW, 11-01-2001 04:13:23  
Sorry for the delay in responding to this post. Only have internet at work and took friday off. I am to cheep to by computer for home let alone the monthly bill for the internet. I will stop by monday evening to find out about the baler and how much they are asking, will post info. Is there anything specifically I should look for? Any weak areas to check out? Let me know by monday. To farmer Tom, I live on ashville pike just north of ashville, not many oliver fans in area that I have found. Seems to be all red and that other green around here.

Duane W.

[Log in to Reply]  [No Email]
Farmer Tom

11-05-2001 05:16:06




Report to Moderator
 Re: Re: Found620OliverBaler.......AnybodyWantOne in reply to DuaneW, 11-03-2001 04:02:22  
To Duane W - thanks for the info; I will make an attempt to locate it. Will be interested in your next information posting on the baler. Really don't have any pro's or con's for the baler, just interested in it to go with a Oliver I have. I'm on the west side of Cols and have ground near Sunbury. Thanks, - Farmer Tom



[Log in to Reply]  [No Email]
Jack

11-01-2001 17:47:59




Report to Moderator
 Re: Found620OliverBaler.......AnybodyWantOne in reply to DuaneW, 11-01-2001 04:13:23  
Recently parted out a 520 baler a lot of the parts are the same between the 5, 6, and 720.
If any one is looking please respond asap. the rest of the machine is going to scrap.



[Log in to Reply]  [No Email]
Gary M

11-03-2001 22:38:54




Report to Moderator
 Re: Re: Found620OliverBaler.......AnybodyWantOne in reply to Jack, 11-01-2001 17:47:59  
i want the needles



[Log in to Reply]  [No Email]
Jack

11-05-2001 19:01:58




Report to Moderator
 Re: Re: Re: Found620OliverBaler.......AnybodyWantOne in reply to Gary M, 11-03-2001 22:38:54  
Sorry the needles are gone.



[Log in to Reply]  [No Email]
Farmer Tom

11-01-2001 09:29:52




Report to Moderator
 Re: Found620OliverBaler.......AnybodyWantOne in reply to DuaneW, 11-01-2001 04:13:23  
I'm close to Ashville; can you give me an exact location of it location? Address, road number, etc. Interested in unit to go with my Oliver. Thanks.



[Log in to Reply]  [No Email]
Charles Wray

11-01-2001 07:07:51




Report to Moderator
 Re: Found620OliverBaler.......AnybodyWantOne in reply to DuaneW, 11-01-2001 04:13:23  
Duane, If Shep does not want the baler I do I live in western Pa. How much is the seller asking for it?
Thanks



[Log in to Reply]  [No Email]
ShepFL

11-01-2001 06:11:31




Report to Moderator
 Re: Found620OliverBaler.......AnybodyWantOne in reply to DuaneW, 11-01-2001 04:13:23  
I am interested in the baler. I believe parts are hard to find but would like to have some Oliver implements to go with my Oliver tractor. My work # is 800.331.4289 x4766

I just turned down a 720 baler a buddy found sitting. It was to much work to repair and had been pretty well picked over by the junkyard buzzards.

Thanks



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy