Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

1650 3ptArms

Welcome Guest, Log in or Register
Author 
DuaneW

10-15-2001 12:49:57




Report to Moderator

Has anyone had problems with the Balls falling out of sockets on the 3 pt hitch arms? The edges are chipped and sockets worn, anything you can do to rebuild the ball sockets? Thanks for any info... Duane Warnock
Ashville, Ohio




[Log in to Reply]   [No Email]
Rick

10-15-2001 19:19:57




Report to Moderator
 Re: 1650 3ptArms in reply to DuaneW, 10-15-2001 12:49:57  
about sixty dollars and a good welder, it's been done before. e-mail or call me 330-264-9720-Ohio



[Log in to Reply]  [No Email]
Johnnie

10-18-2001 19:34:12




Report to Moderator
 Re: Re: 1650 3ptArms in reply to Rick, 10-15-2001 19:19:57  
I used my truste old Lincoln and laid a bead around lower half and then ground it off to fit new balls been working just fine for 4 yrs.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy