Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

Any tips on removeing sleve

Welcome Guest, Log in or Register
Author 
Ken

05-31-2001 18:37:31




Report to Moderator

Can anyone help I have a 70 RC with a stuck piston and can not get the sleve and piston out the piston is not any good any help Thanks Ken




[Log in to Reply]   [No Email]
larry Wolfe

06-01-2001 09:45:30




Report to Moderator
 Re: any tips on removeing sleve in reply to Ken , 05-31-2001 18:37:31  
I would use a hydrolic jack with a steel bar cut to the proper lenght so you can jack it up and out from the bottem.



[Log in to Reply]  [No Email]
larry Wolfe

06-01-2001 09:37:32




Report to Moderator
 Re: any tips on removeing sleve in reply to Ken , 05-31-2001 18:37:31  
I would use a hydrolic jack with a steel bar cut to the proper lenght so you can jack it up and out from the bottem.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy