Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

Oliver tractor question

Welcome Guest, Log in or Register
Author 
schramm

02-01-2001 23:13:57




Report to Moderator

hello,i have a chance to get an oliver tractor and would like some advice from you enthusiasts.

IT has a front end like i havent seen before with the axle being the shape of a tube or pipe.

it is a 1945 oliver 70RC with 6 cyl. engine(gas),it runs good,magneto ignition,has a shaft on the side that i believe is for a pulley to run equipment but it is missing the pulley,drives good also,needs tires but every tractor ive come across has needed tires,is missing the front grill and one side curtain on the right side in the rear,has been sitting outside for years but starts and runs good,electric and hand crank start,no hydraulics or attachments.

I realize that different areas of the country bring different prices but i am hoping that people from all areas of the country can reply to give a general idea of an estimate.

i know what i usually give for tractors but i havent come across an oliver before and this guy insists i make an offer.Im afrid if i say to low a price ill lose my chance all together and it will end up being scrapped!The people who have already made offers are scrappers and they want it to cut up for metal and certain parts to keep and sell.They have made offers of like 150-$200.I know its worth more than that cause it runs but i dont want to offer to high and not be able to sell it for my investment if it doesnt turn out to be worth fixing up.

thanks for your time in reading this and id appreciate any comments you guys have on my question...schramm...

p.s. if it turns out that i cant get it or dont want it for some reason would anybody be interested??

[Log in to Reply]   [No Email]
Ron Bleess

02-05-2001 10:10:58




Report to Moderator
 Re: oliver tractor question in reply to schramm, 02-01-2001 23:13:57  
I am not sure what this tractor is worth, but I have a rc 70 that I purchased last year that was pretty much restored. Has good back tires,new front tires,all good sheet metal and grill, good paint job and parade ready. Has minor problem with a small front seal leak and charging problem. Also has dual exhuast which I think was done to conserve on restoration cost as replacemnent manifolds are spendy. Tractor runs good and is for sale at a good price, considering restoration cost, at $2,000. I am located in south central Minnesota (Mankato) if you or anyone else is interested.

[Log in to Reply]  [No Email]
schramm

02-05-2001 22:02:42




Report to Moderator
 Re: Re: oliver tractor question in reply to Ron Bleess, 02-05-2001 10:10:58  
hi ron,thanks for telling me about your tractor but the only reason i am even considering this tractor is because it is so near my house.See i dont have a trailer nor a truck big enough to pull a tractor on a trailer so i try to find tractors around my house that i can either drive home or pull home with my tractor.

thanks for the offer...schramm...



[Log in to Reply]  [No Email]
Big Jim

02-02-2001 14:29:35




Report to Moderator
 Re: oliver tractor question in reply to schramm, 02-01-2001 23:13:57  
Personally, I would not buy a tractor like this unless you are just interested in keeping one for show. Even if you spent a lot of money restoring, it would still be useless for any type of actual work. Like one of the other guys said, if you like older Olivers buy a 66, 77, or 88. Some of the later model ones had useful features like independent PTO and live hydraulics. These tractors are still good enough for a lot of chore work yet today.

[Log in to Reply]  [No Email]
ROY MI

02-02-2001 07:21:07




Report to Moderator
 Re: oliver tractor question in reply to schramm, 02-01-2001 23:13:57  
I would not pay over 300 to much work
very little tractor.
the only good thing it will keep you out of
the bars. LOL



[Log in to Reply]  [No Email]
Cowboy Bill Watts

02-02-2001 05:29:18




Report to Moderator
 Re: oliver tractor question in reply to schramm, 02-01-2001 23:13:57  
schramm....

in my humble opinion.....

you gotta be careful restoring 60s and 70s. they're expensive to work on (again IMHO), and once you're done you've got a parade tractor, nothing more. no hydraulics, and the PTO will run you through a fence. it's hard to recoup your investment, unless you intend to keep it and pass it on to schramm jr.

if it needs tires, that's $500. you say 3 of the side curtains are there. what kind of shape? if you need to replace them, and the grill, that's $500-. it runs -- but does the engine need work? if so, that's another $500, depending on how much of it you do. paint? on and on.....

if you restore a fleetline (66, 77, 88), or later, many models had dual hydraulics, and live PTO. after you restore one, the tractor can actually take on light chores -- besides the parades.

i would not go above $500. good luck..... .

[Log in to Reply]  [No Email]
Scott Green

02-02-2001 04:01:45




Report to Moderator
 Re: oliver tractor question in reply to schramm, 02-01-2001 23:13:57  
Schramm , It's hard to tell what it would be worth without seeing it. If it needs an exaust/intake manifold , your talking $400.00. If it has 40" rear tires(and most likly it has), your in trouble. How are the rear rims?. You don't have live PTO. And you have no hydraulics. Pretty much just a mule. Personally , I wouldn't go any higher than $500.00 max. I know other people are asking quite a lot more , depending on shape , but I wouldn't pay it. I don't have time to go into this any further at this point. Other readers can put in there opinions.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy