Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

OC3 Front Roller Assy.

Welcome Guest, Log in or Register
Author 
Bob Richard

03-06-2000 17:22:29




Report to Moderator

Can someone help me with a drawing or info on the track roller assy. With much pain I have managed to take the assy apart, and it appears that the inner shaft is supported by Oilite bearings, and an outer seal assy. Is this true, and if so does anyone have any for sale or know where I can purchase them.
The drive sprocket bolts were loose and a couple were broken so I decided to investigate and now I'm in to it real deep, as you can see.
It appears I am going to need other parts also.

[Log in to Reply]   [No Email]
Ninh Hoa

03-08-2000 05:56:34




Report to Moderator
 Re: OC3 Front Roller Assy. in reply to Bob Richard, 03-06-2000 17:22:29  
You've heard from one of the gurus himself. I know he's on the mend from a broken leg. Call Landis. And just so I keep my word, the guy in Connecticut is Ed Bezanson. His phone number is 203-442-5182. I have never dealt with him....my crawler's manual came from him before I owned the crawler. Good luck.



[Log in to Reply]  [No Email]
Albert Duroe

03-07-2000 17:13:04




Report to Moderator
 Re: OC3 Front Roller Assy. in reply to Bob Richard, 03-06-2000 17:22:29  
Call Landis

zimmerman @ 717 738 2573 he has the parts you need plus he would have parts and repair manual that he could sell you. If you need more help E mail me. Spark



[Log in to Reply]  [No Email]
Ninh Hoa

03-07-2000 06:11:07




Report to Moderator
 Re: OC3 Front Roller Assy. in reply to Bob Richard, 03-06-2000 17:22:29  
Bob, I can sorta help you with who might really be able to help you. I have bought parts from Albert (Sparky) Duroe, who lives in Iowa. His email is '[email protected]'. Very knowledgeable, and has parts. I bought some from him.

A manual came with my OC-3, and it was put together by a guy in Conneticutt. Also, Landis Zimmerman, in Pennsylvania has parts. Tomorrow, I can give you more info on both the manual guy and Landis. I don't have it with me here at work.

[Log in to Reply]  [No Email]
Mongo

03-06-2000 19:44:33




Report to Moderator
 Re: OC3 Front Roller Assy. in reply to Bob Richard, 03-06-2000 17:22:29  
There is a guy advertising parts for Oliver loader/dozers in the classifieds. He is in Washington state, sounds like you might give him a call. He has one with a tooth missing on the tranny and a couple of winches listed. Good luck.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy