Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Oliver, Cletrac, Co-op & Cockshutt Tractors Discussion Forum
:

560 cockshutt

Welcome Guest, Log in or Register
Author 
Jeremy S.

03-10-2008 17:34:04




Report to Moderator

Hello i just bought 2 cockshutt 560s for 2800 one is strictly parts and the other runs like a top. I know i am going to put a new set of tires all the way around it. But i am looking for the 3 pt. hitch arms for this tactor. Does anyone know where I might be able to purchase.




[Log in to Reply]   [No Email]
SCOTT ADAMS.

03-11-2008 15:52:39




Report to Moderator
 Re: 560 cockshutt in reply to Jeremy S., 03-10-2008 17:34:04  
I need a cyl head for a 560,Do you have one on your parts tractor?



[Log in to Reply]  [No Email]
Irv Buttray

03-11-2008 20:57:19




Report to Moderator
 Re: 560 cockshutt in reply to SCOTT ADAMS., 03-11-2008 15:52:39  
What year is your 560? What motor do you have? I beleive I have a head for a 4-270 but could be for the L-4 have to check. Is there a # on your head? I am in western Pa how about you?



[Log in to Reply]  [No Email]
Jeremy S.

03-12-2008 19:30:50




Report to Moderator
 Re: 560 cockshutt in reply to Irv Buttray, 03-11-2008 20:57:19  
I am not the one that needs a head i just am looking for 3pt hitch things.



[Log in to Reply]  [No Email]
J Schwiebert

03-11-2008 17:24:10




Report to Moderator
 Re: 560 cockshutt in reply to SCOTT ADAMS., 03-11-2008 15:52:39  
Hey remember here there are two different 560 heads. One is the direct injection version the other one has the precups. Now were either one pressure tested? Remember a lot of diesels have cracks in the head that do not cause problems.J



[Log in to Reply]  [No Email]
Jeremy S.

03-11-2008 19:03:18




Report to Moderator
 Re: 560 cockshutt in reply to J Schwiebert, 03-11-2008 17:24:10  
the one on the running one was never removed. The one that is cracked the water pretty much pours into the cylinder, but these 2 tractors only have 2 serial numbers between them so they are pretty much the same tractor.



[Log in to Reply]  [No Email]
J Schwiebert

03-11-2008 22:32:36




Report to Moderator
 Re: 560 cockshutt in reply to Jeremy S., 03-11-2008 19:03:18  
Are these heads for the direct injection engine or the earlier L-4 engine? Over the weekend I guess I should check if those heads have tubes.



[Log in to Reply]  [No Email]
krm

03-12-2008 07:05:44




Report to Moderator
 Re: 560 cockshutt in reply to J Schwiebert, 03-11-2008 22:32:36  
I have a direct injection head for sale if you need one.Fits 560 after serial#cn5001.



[Log in to Reply]  [No Email]
SCOTT ADAMS.

03-12-2008 06:04:54




Report to Moderator
 Re: 560 cockshutt in reply to J Schwiebert, 03-11-2008 22:32:36  
My 560 is a 1958, ser#cn5542D. The engine is 4-270. Injection pump type#3242326,ser#R11680PA. The guy I bought the tractor from, had the head checked, they told him it was not repairable. John don't know if your remember me, I'm friend of Wes D.I used to work at the Chev dealer at Fargo.Pulled with a E-5.



[Log in to Reply]  [No Email]
J Schwiebert

03-12-2008 07:28:18




Report to Moderator
 Re: 560 cockshutt in reply to SCOTT ADAMS., 03-12-2008 06:04:54  
I kind of guessed that. I sent you an e-mail. It was a good time going to your place. J.



[Log in to Reply]  [No Email]
Jeremy S.

03-11-2008 17:09:01




Report to Moderator
 Re: 560 cockshutt in reply to SCOTT ADAMS., 03-11-2008 15:52:39  
the one on the parts tactor is cracked as well because the guy i bought it off took and bought everything to rebuild the head and expected to be able to pull the head off of it and go through it and put it on the running one but he found that it was badly cracked so that did not happen.



[Log in to Reply]  [No Email]
Neil Grant

03-10-2008 19:03:54




Report to Moderator
 Re: 560 cockshutt in reply to Jeremy S., 03-10-2008 17:34:04  
I have the 3 point hitch arms as well as other parts for your 560 Link
I>Link started making the 3 point parts for a 35 and made some adddtional sets. This started a little hobby.
Take a look at the web site, and let me know what you need. I have 560 arms already made as well as the sway bars, etc.
Neil Grant 613-987-9967 or [email protected]

[Log in to Reply]  [No Email]
730virgil

03-10-2008 18:27:15




Report to Moderator
 Re: 560 cockshutt in reply to Jeremy S., 03-10-2008 17:34:04  
look for phil heisey on archives he is good guy to start with



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy