Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Oliver, Cletrac, Co-op & Cockshutt Tractors Discussion Forum
:

60 and 66

Welcome Guest, Log in or Register
Author 
Anderson

01-12-2008 16:33:52




Report to Moderator

Can 66 sleeves and pistons be made to work in a 60?




[Log in to Reply]   [No Email]
Brian Jasper co. Ia

01-14-2008 17:47:41




Report to Moderator
 Re: 60 and 66 in reply to Anderson, 01-12-2008 16:33:52  
No, nothing in the 60 motor fits in the 66 and vise versa. I'm told that a 66 motor will bolt in place of the 60. The only difference is supposed to be the exhaust. I know the 60 exhaust comes off the rear side of the manifold while the 66's is in the center. Maibach Tractor in Creston Ohio can get you anything you need for a 60.



[Log in to Reply]  [No Email]
Ron Grother

01-13-2008 02:43:03




Report to Moderator
 Re: 60 and 66 in reply to Anderson, 01-12-2008 16:33:52  
no 66s are bigger. bore out the 60 sleeves.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy