Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

Any goverNor experts out there?

Welcome Guest, Log in or Register
Author 
Mac (MI)

07-22-1999 13:52:02




Report to Moderator

In an earlier message, called timing or gov. spring preload, Dell helped me with an answer. Now I need to know, what are flat-spotted governor balls? The balls that came with the rebuild kit from Walt's Tractor supply had a flat spot on each one. Is this what he means? Is that a problem? Why?

Anyway, I went to the ball bearing shop and bought new ones to replace the other ones, but I just need to know what I am dealing with. Thanks in advance!

[Log in to Reply]   [No Email]
Pat

07-22-1999 21:30:26




Report to Moderator
 Re: Any goverNor experts out there? in reply to Mac (MI), 07-22-1999 13:52:02  
Some jerk probably purchased kit from Walts remmoved new balls from kit and put his used balls back in kit and returned for a refund . I recently bought a gov kit from Walt's . No flat spots on new balls. Gov works great. By the way I still have my old balls.Some people are such _ _ _HOLES. Have a nice day.



[Log in to Reply]  [No Email]
Mac (MI)

07-23-1999 04:14:46




Report to Moderator
 Re: Re: Any goverNor experts out there? in reply to Pat, 07-22-1999 21:30:26  
AMEN!!!



[Log in to Reply]  [No Email]
David (La)

07-22-1999 18:14:58




Report to Moderator
 Re: Any goverNor experts out there? in reply to Mac (MI), 07-22-1999 13:52:02  
I just put in a kit from Stevens and all the balls were round, but my old ones had some pretty large flat spots. These balls need to be able to roll freely in order for centrifugal force to send them in/out and thus apply pressure/release pressure on the dish that puts spring pressure to the throttle setting. Pretty neat deal that governor, and been around a long time, wonder who figured that one out? I bet it really took 20 years to develope and the three point hitch was done and waiting!

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy