TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Ford 9N, 2N & 8N Discussion Forum

Midwestern Industries Model 100 front end loader

Welcome Guest, Log in or Register

Author

KenMcG

01-24-2008 18:39:58

Report to Moderator

You guys are on an awesome run of answering my questions tonight, so I'm going to get while the getting is good and the fish are biting!

I bought this junky Ford 8N that I am fixing up and I am new to tractors. This thing has the heaviest, beefy, rigid front end loader that I have seen at looking at several tractors and on Ebay. It has it's own hydraulic unit driven by a front end extension PTO shaft and an articulating bucket as wide as the tractor.

I cannot find anything out about this front end loader on the internet as far as a manual.

The guy that sold me the tractor put a dinosaur of an old grator blade on the back and the hydraulics could only lift it about 3 inches and it would bleed off and drag the ground. This grator blade has to weigh 550 pounds. I went to Rural King and bought an new one and no problems. I used the front end loader to chain onto the old grator blade just to pick it up and move it out of the way and it was no effort.

Comments please?

Ken

[Log in to Reply] [No Email]

Al Deal

03-30-2008 17:30:17

Report to Moderator

Re: Midwestern Industries Model 100 front end loader in reply to KenMcG, 01-24-2008 18:39:58

I just got a midwest front loader for 300$ today I `ll be boltin her up to my 1940 9N this week if the weather holds .Let me know if ya find out any info on manuels ThanksAl

[Log in to Reply] [No Email]

Jim L

02-01-2008 23:15:32

Report to Moderator

Re: Midwestern Industries Model 100 front end loader in reply to KenMcG, 01-24-2008 18:39:58

Want to know where i might find something like this to fit my 1955 Ford 800.I am on the west coast Oregon

[Log in to Reply] [No Email]

Ben VanDusen

01-25-2008 08:41:35

Report to Moderator

Midwestern Industries Model 100 front end loader in reply to KenMcG, 01-24-2008 18:39:58

thanks guys, this forum saves me,i thought i was the only one with a Midwestern industries loader cause i couldn't find any information or have never seen one before, i bought it with my 48'8N and boy was it great. I ended up selling the tractor but still got the loader if anyone in the New York area is interested.

[Log in to Reply] [No Email]

WaltMo

01-25-2008 08:07:48

Report to Moderator

Re: Midwestern Industries Model 100 front end loader in reply to KenMcG, 01-24-2008 18:39:58

I have a 6272 Midwest loader. Looks the same.
WaltMo

Untitled URL Link

[Log in to Reply] [No Email]

Sean (TX)

01-24-2008 19:02:22

Report to Moderator

Re: Midwestern Industries Model 100 front end loader in reply to old, 01-24-2008 18:39:58

Link

[Log in to Reply] [No Email]

KenMcG

01-24-2008 18:57:46

Report to Moderator

Re: Midwestern Industries Model 100 front end loader in reply to KenMcG, 01-24-2008 18:39:58

How do you attach a picture or a file to this reply?

[Log in to Reply] [No Email]

KenMcG

01-24-2008 19:08:08

Report to Moderator

Re: Midwestern Industries Model 100 front end loader in reply to KenMcG, 01-24-2008 18:57:46

Here it is.

[Log in to Reply] [No Email]

Bill No MN

01-24-2008 20:36:33

Report to Moderator

Re: Midwestern Industries Model 100 front end loader in reply to KenMcG, 01-24-2008 19:08:08

Sure looks like the loader I have on my 8n which is also a midwestern industries loader. I haven't been able to find a thing about this loader. Seems the company isn't anymore. Good luck finding info on it. If you do I sure would like to know where.-Bill

[Log in to Reply] [No Email]

lonestarjeff

01-24-2008 19:16:49

Report to Moderator

Re: Midwestern Industries Model 100 front end loader in reply to KenMcG, 01-24-2008 19:08:08

Ken...that looks alot like a Davis loader, which was later bought by Massey Ferguson. I want to say somewhere before or after Midwestern was linked up to them.

If I can find the info I'll post it.

Jeff

[Log in to Reply] [No Email]

Bob

01-24-2008 19:35:36

Report to Moderator

Re: Midwestern Industries Model 100 front end loader in reply to lonestarjeff, 01-24-2008 19:16:49

Here's a photo of a Davis someone posed a few days again, on craigslist. somewhere, IIRC.
Third Party Image

I've owned a few, over the years, and have one to fix up, along with my "basketcase" 8N.

There's some manuals available for viewing at "Brand X".
Third Party Image

[Log in to Reply] [No Email]

Dunk

01-24-2008 19:49:47

Report to Moderator

Re: Midwestern Industries Model 100 front end loader in reply to Bob, 01-24-2008 19:35:36

It seems there are some differences.

Here is another pic from Ken that he emailed me.

third party image

[Log in to Reply] [No Email]

lonestarjeff

01-24-2008 19:46:07

Report to Moderator

Re: Midwestern Industries Model 100 front end loader in reply to Bob, 01-24-2008 19:35:36

Bob...funny that you would mention the Davis manuals over on "Brand X"...guess who donated them? :-)

Jeff

[Log in to Reply] [No Email]

Dunk

01-24-2008 18:44:29

Report to Moderator

Re: Midwestern Industries Model 100 front end loader in reply to KenMcG, 01-24-2008 18:39:58

We love pictures!!

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy