attn: Tweeter - re: Sway Bar Brackets

One of my Uncles made a trailer hitch for me. (It's a great hitch, by the way) As you can see from the first pic, you can't put a sway bar on it.

So he came up with the hookup that you see in the following 2 pictures. Basically it uses a sway bar from an MF 165, and a clamp that goes around the lift arm.

It isn't too hard to make, and it holds fairly well. If I pull someething sideways fairly hard it will slide.

Here's a picture of the trailer hitch:

Link

And here are a couple of pictures of the sway bar hookup on the other side:

Link

http://i3.photobucket.com/albums/y88/Boss_Hog/Hitch2.jpg

Is that a 135 it's mounted on?

Jeff

Link

Link

My Uncle initially tried to make a bale spear out of the thing. But he decided to scrap the idea, and made me the trailer hitch.

The tractor is an MF35.

I hope Tweeter has seen this thread. He didn't have an email address in his posts, or I would have dropped him a line.

If anyone emails him regularly, would you mind pointing out this thread to him?

Jeff