Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
Order Ford 8N Parts Online

8N Hydraulic Pump Rebuild.......Update

Welcome Guest, Log in or Register
Author 
Matt Doyle

04-25-2001 20:12:20




Report to Moderator

Last week I posted a question about how the flanges and pistons go on the cam. Well, I took the pump to the local NH dealer and the owner himself put it all together in about 10 minutes. (Didn't even charge anything!) The problem was not with the bronze flanges as I had thought. The cast iron rectangles that the pistons are affixed to are machined only on 1 side and I was trying to put it together with 1 or both rectangles backwards. The old rectangles were machined on both sides. Live & learn, I reckon.

[Log in to Reply]   [No Email]
bj/8N/mt

04-26-2001 05:14:53




Report to Moderator
 Re: 8N Hydraulic Pump Rebuild.......Update in reply to Matt Doyle, 04-25-2001 20:12:20  
Congrats on getting the job done

At the NH dealer you discovered part of the fun of owning these critters. If you had walked in with a part off a Genesis you would have got hit for minimum shop charge; waste disposal fee; consumeable supply fee; and plan to prepare fees. The guy was obviously on a trip down memory lane and enjoyed doing it. There is one older guy at my local NH dealer that can't talk enough about 8N's and when I go in for parts I always get plenty of free advice.

Your milage may vary

[Log in to Reply]  [No Email]
mf/8n/ks

07-06-2006 18:40:41




Report to Moderator
 Re: Re: 8N Hydraulic Pump Rebuild.......Update in reply to bj/8N/mt, 04-26-2001 05:14:53  
It's good to know that there are good folk somewhere out there. Just started working on my 8N's hydraulics. The forks wouldn't go down. I dropped the pump and took it to my local NH. It looked to me as though the intake valve was stuck and was hoping someone there could verify that. They wouldn't even look at it for less that $244. I took it home cleaned everything and the valve freed up.



[Log in to Reply]  [No Email]
Don (NC)

04-26-2001 08:03:11




Report to Moderator
 Re: Re: 8N Hydraulic Pump Rebuild.......Update in reply to bj/8N/mt, 04-26-2001 05:14:53  
It's nice to find those guys. The NH dealer near me has a parts manager who worked on N's when they were selling them. They have N pictures and parts on display. The parts manager's two sons work there and he's taught them a lot of what he knows about the N's. He gives out a lot of free advice.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy