Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

12v alternator

Welcome Guest, Log in or Register
Author 
DD8NMI

04-04-2001 19:58:55




Report to Moderator

Looking for a picture of a 12v alternator installation. I checked the archives but it is a bit late in the evening to check that many (over 1000) messages to see if there are picts attached. I have the old generator off and the new alternator on the floor. Just trying to get some ideas on what to do for the bracket. Thanks for the info and many thanks to those who responded to my query about the radius arm pins.

Dell, should I put some A69s or maybe some 2222Cs (for higher frequency) on the old girl?

[Log in to Reply]   [No Email]
2221F's........Dell (WA)

04-04-2001 22:40:21




Report to Moderator
 Re: 12v alternator in reply to DD8NMI, 04-04-2001 19:58:55  
Hermetically sealed, 500 degrees, 6-32 screw mounted. The ol' N will never know they're there. I blown the little teardrop cap off too many 2222C's from too many G's. They're just not robust enuff for out N's. (grin)

try archives on 30 march 2001 posted by Sam (Mo.) at 08:18:14 in reply to Alternator not working posted by Bill in Houston on March 30, 2001 at 06:00:35.....Dell



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy