Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

? for Ed Gooding, Dearborn back blade

Welcome Guest, Log in or Register
Author 
Keith _Md

02-20-2003 04:19:19




Report to Moderator

Ed. I have seen post's in the past
where you post great literature for dearborn implements. My uncle gave me an
original Dearborn back blade to use with my 51 8N, and it looks like it is
missing the cutting edge. I do not have the model number with me here at
work, but I thought there might not have been to many types of them. If you
have any info on them, could you email it to me. I would love to see it, and
check and see if my blade is missing anything. Thanks very much. Keith
>

[Log in to Reply]   [No Email]
Farmer Tim *8N15513*

02-20-2003 18:11:20




Report to Moderator
 Re: ? for Ed Gooding, Dearborn back blade in reply to Keith _Md, 02-20-2003 04:19:19  
Hi Keith-
Our good friend Ed Gooding must be mysteriously absent this week otherwise I'm sure he would've anwered by now. Meantime try his archive collection at the ----- --web site. Click on Users Folders on the left and search for Ed Gooding. Open it up and you'll find rear blades there. If you don't find what you need, contact me again and I'll send you a scan of what you need. Be advised that if you are missing parts, you may not find replacements easily. Finding someone to make new ones could be costly as well as finding another original to pilfer parts from. Good luck and keep us posted...

Tim Daley

[Log in to Reply]  [No Email]
Dell (WA)

02-20-2003 07:40:11




Report to Moderator
 Re: ? for Ed Gooding, Dearborn back blade in reply to Keith _Md, 02-20-2003 04:19:19  
Keith..... ....while Ed's a goodguy, and has lottsa litature that he freely shares with us N-Nuts, have you checked out www.n-news.com archive of implement manuals?..... ....Dell



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy